The safety of a motor vehicle is paramount. Even if the Nissan Versa are financial holes, certain routine service works are vital. Today we will explain to you when to replace the brake discs of your Nissan Versa? To accomplish this, to begin with, we will discover what the brake discs of your motor vehicle are used for, then, when to replace the brake discs of your Nissan Versa, and, finally, how to change them with new ones.
Benefit of the brake discs of a Nissan Versa
We start our content by detailing what the brake discs of a Nissan Versa are used for, it will enable you to understand why it is necessary to ensure that they are constantly in good functioning conditions.
Brake discs are the main part of your braking system. Indeed, braking on an Nissan Versa is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is placed on your wheel. When the brake pads will pinch the discs which will cause your Nissan Versa to brake.
When to replace the brake discs of a Nissan Versa?
We will now proceed to the section that most certainly attracts you to this content page, namely, when changing the brake discs of a Nissan Versa? How we described it to you just before, the brake discs and pads work in osmosis, however these two elements are wearing auto parts and they will, over time and especially the friction when braking wears out and loses braking power. We will now detail the different ways to know when to change them:
- We consider that generally speaking the brake discs should be changed every 80, 000 – 100, 000 km on a Nissan Versa , however it is necessary to know that according to your driving style and the type of journey this can change considerably. In truth, if you principally drive on the motorway and your brakes are just slightly used, this value can increase, on the other hand, if you just drive in built-up areas, it can reduce.
- A basic and powerful method to identify the state of the brake discs on your motor vehicle is during the technical inspection. In truth this thorough control checks the state of your brakes and the controller will tell you if they are in good state or need to be changed.
- A simple visual method to know when to replace the brake discs on your Nissan Versa is to remove the wheels after the car has been set on stands. Once removed, you will be able to access your discs and check their state. If they have any big scratches or deformations you will have to replace them. Otherwise the second indicator to check is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.
.
How to replace the brake discs on your Nissan Versa?
Finally, to end this content page we will quickly show you how to replace the brake discs of your Nissan Versa. You must know that if you replace the brake discs of your car, you will absolutely have to change the brake pads of your Nissan Versa, don’t think twice to seek advice from our content page which exposes you how to make this replace.
As far as changing discs is concerned, here are the main steps to follow:
- Put your Nissan Versa on stands, take off the wheels you want to action on.
- Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to make all your changes.
- Using large Torx bits, remove the two nuts that lock the upper part of your brake caliper, remove it.
- Remove your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you may possibly need a mallet to remove the discs.
- Replace the discs and tighten them with the new torx screws provided, replace your pads, reassemble the upper part of the caliper and tighten everything tightly.
- Mounting your wheels, and make sure to do a 500-kilometer brake break-in before braking hard.
To discover more tips on the Nissan Versa, take a look at the Nissan Versa category.
