The safety of a motor vehicle is essential. Even if the Mitsubishi Space star 2 are economic holes, certain routine service works are fundamental. Today we will explain to you when to replace the brake discs of your Mitsubishi Space star 2? To get this done, to begin with, we will discover what the brake discs of your motor vehicle are used for, then, when to replace the brake discs of your Mitsubishi Space star 2, and, finally, how to replace them with new ones.

change-brake-discs-mitsubishi-space-star-2

Interest of the brake discs of a Mitsubishi Space star 2

We start our content page by explaining what the brake discs of a Mitsubishi Space star 2 are used for, it will enable you to discover why it is essential to ensure that they are constantly in good working order.
Brake discs are the most important part of your braking system. In truth, braking on an Mitsubishi Space star 2 is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is mounted on your wheel. When the brake pads will pinch the discs which will cause your Mitsubishi Space star 2 to brake.

When to replace the brake discs of a Mitsubishi Space star 2?

We will now move on to the part that certainly attracts you to this article, namely, when replacing the brake discs of a Mitsubishi Space star 2? How we mentioned it to you just before, the brake discs and pads work in osmosis, nevertheless these two elements are wearing auto parts and they will, with time and especially the friction when braking wears out and loses braking power. We will now outline the different ways to know when to replace them:

  • We consider that generally speaking the brake discs should be changed every 80, 000 – 100, 000 km on a Mitsubishi Space star 2 , nevertheless it is essential to know that dependent on your driving style and the type of journey this can vary substantially. In fact, if you specifically drive on the motorway and your brakes are just slightly used, this amount can increase, conversely, if you just drive in built-up areas, it can reduce.
  • A simple and powerful way to identify the state of the brake discs on your motor vehicle is during the technical inspection. In fact this thorough control checks the state of your brakes and the controller will tell you if they are in good state or need to be changed.
  • A basic visual way to know when to replace the brake discs on your Mitsubishi Space star 2 is to remove the wheels after the vehicle has been set on stands. Once removed, you will be able to access your discs and verify their state. If they have any big scratches or deformations you will have to replace them. In any other case the second indicator to check is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.

.

How to replace the brake discs on your Mitsubishi Space star 2?

Finally, to conclude this article we will quickly show you how to replace the brake discs of your Mitsubishi Space star 2. You must know that if you replace the brake discs of your car, you will absolutely have to change the brake pads of your Mitsubishi Space star 2, don’t think twice to consult our article which exposes you how to make this replace.
As far as changing discs is concerned, here are the most important steps to follow:

  • Put your Mitsubishi Space star 2 on stands, take off the wheels you want to work on.
  • Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to produce all your changes.
  • Using large Torx bits, remove the two nuts that lock the upper part of your brake caliper, remove it.
  • Take out your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you may possibly need a mallet to remove the discs.
  • Replace the discs and tighten them with the new torx screws provided, replace your pads, reassemble the upper part of the caliper and tighten everything tightly.
  • Mounting your wheels, and remember to do a 500-kilometer brake break-in before braking hard.

To find more tips on the Mitsubishi Space star 2, take a look at the Mitsubishi Space star 2 category.