The safety of a car is essential. Even if the Mitsubishi L200 are economic holes, certain maintenance actions are vital. In this article we will explain to you when to change the brake discs of your Mitsubishi L200? To achieve this, to begin with, we will find out what the brake discs of your car are used for, then, when to change the brake discs of your Mitsubishi L200, and, finally, how to change them with new ones.

change-brake-discs-mitsubishi-l200

Benefit of the brake discs of a Mitsubishi L200

We begin our article content by detailing what the brake discs of a Mitsubishi L200 are used for, it will allow you to understand why it is essential to make certain that they are always in good functioning order.
Brake discs are the most important component of your braking system. In fact, braking on an Mitsubishi L200 is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is attached to your wheel. When the brake pads will pinch the discs which will trigger your Mitsubishi L200 to brake.

When to change the brake discs of a Mitsubishi L200?

We will now move on to the part that most certainly attracts you to this content, namely, when replacing the brake discs of a Mitsubishi L200? How we explained it to you just before, the brake discs and pads work in osmosis, however these two components are wearing auto parts and they will, after some time and especially the friction when braking wears out and loses braking power. We will now highlight the different methods to know when to change them:

  • We consider that generally the brake discs should be changed every 80, 000 – 100, 000 km on a Mitsubishi L200 , however it is essential to know that according to your driving style and the type of journey this can change considerably. In truth, if you specifically drive on the motorway and your brakes are only slightly used, this amount can increase, conversely, if you only drive in built-up areas, it can decrease.
  • A basic and powerful technique to find out the condition of the brake discs on your car is during the technical inspection. In truth this thorough control checks the state of your brakes and the controller will tell you if they are in good condition or need to be changed.
  • A simple visual technique to know when to change the brake discs on your Mitsubishi L200 is to remove the wheels after the car has been set on stands. Once taken off, you will have the ability to access your discs and verify their condition. If they have any big scratches or deformations you will have to change them. In any other case the second indicator to check is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.

.

How to change the brake discs on your Mitsubishi L200?

Finally, to end this content we will quickly explain how to change the brake discs of your Mitsubishi L200. You must know that if you change the brake discs of your motor vehicle, you will absolutely have to change the brake pads of your Mitsubishi L200, don’t hesitate to seek advice from our content which explains you how to make this change.
As far as changing discs is concerned, here are the most important steps to stick to:

  • Put your Mitsubishi L200 on stands, take off the wheels you want to work on.
  • Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to make all your changes.
  • Using large Torx bits, take out the two nuts that lock the upper component of your brake caliper, take out it.
  • Remove your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you may possibly need a mallet to remove the discs.
  • Replace the discs and tighten them with the new torx screws provided, change your pads, reassemble the upper component of the caliper and tighten everything tightly.
  • Mounting your wheels, and make sure to do a 500-kilometer brake break-in before braking hard.

In the event that you have any additional questions about the Mitsubishi L200, do not hesitate to consult our Mitsubishi L200 category.