The safety of a car is very important. Whether or not the Mitsubishi Eclipse are financial holes, certain routine service works are crucial. In this article we will explain to you when to replace the brake discs of your Mitsubishi Eclipse? To accomplish this, first of all, we will see what the brake discs of your motor vehicle are used for, then, when to replace the brake discs of your Mitsubishi Eclipse, and, finally, how to change them with new ones.

change-brake-discs-mitsubishi-eclipse

Interest of the brake discs of a Mitsubishi Eclipse

We start our content by explaining what the brake discs of a Mitsubishi Eclipse are used for, it will allow you to figure out why it is important to be sure that they are constantly in good functioning conditions.
Brake discs are the main component of your braking system. In actual fact, braking on an Mitsubishi Eclipse is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is placed on your wheel. When the brake pads will pinch the discs which will cause your Mitsubishi Eclipse to brake.

When to replace the brake discs of a Mitsubishi Eclipse?

We will now proceed to the part that undoubtedly attracts you to this content, namely, when replacing the brake discs of a Mitsubishi Eclipse? How we mentioned it to you just before, the brake discs and pads work in osmosis, nevertheless these two components are wearing parts and they will, after some time and specifically the friction when braking wears out and loses braking power. We will now outline the different methods to know when to change them:

  • We consider that in general the brake discs should be changed every 80, 000 – 100, 000 km on a Mitsubishi Eclipse , nevertheless it is important to know that depending on your driving style and the type of journey this can change substantially. Indeed, if you specifically drive on the motorway and your brakes are just slightly used, this value can increase, alternatively, if you just drive in built-up areas, it can reduce.
  • A simple and successful method to find out the state of the brake discs on your car is during the technical inspection. Indeed this thorough control checks the state of your brakes and the controller will tell you if they are in good state or need to be changed.
  • A very easy visual method to know when to replace the brake discs on your Mitsubishi Eclipse is to remove the wheels after the car has been set on stands. Once taken off, you will have the ability to access your discs and check their state. If they have any big scratches or deformations you will have to replace them. Otherwise the second indicator to verify is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.

.

How to replace the brake discs on your Mitsubishi Eclipse?

Finally, to end this content we will fairly quickly explain how to replace the brake discs of your Mitsubishi Eclipse. You must know that if you replace the brake discs of your motor vehicle, you will absolutely have to change the brake pads of your Mitsubishi Eclipse, don’t think twice to consult our content which exposes you how to make this replace.
As far as changing discs is concerned, here are the main steps to follow:

  • Put your Mitsubishi Eclipse on stands, take off the wheels you want to work on.
  • Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to make all your changes.
  • Using large Torx bits, take out the two nuts that lock the upper component of your brake caliper, take out it.
  • Remove your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you may need a mallet to remove the discs.
  • Replace the discs and tighten them with the new torx screws provided, replace your pads, reassemble the upper component of the caliper and tighten everything tightly.
  • Mounting your wheels, and make sure to do a 500-kilometer brake break-in before braking hard.

If you want more tutorials on the Mitsubishi Eclipse, go to our Mitsubishi Eclipse category.