The safety of a motor vehicle is important. Regardless if the Mercedes Benz C Class are financial holes, certain routine service actions are indispensable. Today we will explain to you when to replace the brake discs of your Mercedes Benz C Class? To achieve this, to begin with, we will find out what the brake discs of your motor vehicle are used for, then, when to replace the brake discs of your Mercedes Benz C Class, and, finally, how to replace them with new ones.

change-brake-discs-mercedes-benz-c-class

Benefit of the brake discs of a Mercedes Benz C Class

We begin our content page by explaining what the brake discs of a Mercedes Benz C Class are used for, it will allow you to discover why it is essential to make sure that they are constantly in good functioning conditions.
Brake discs are the most important component of your braking system. In actual fact, braking on an Mercedes Benz C Class is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is installed on your wheel. When the brake pads will pinch the discs which will bring about your Mercedes Benz C Class to brake.

When to replace the brake discs of a Mercedes Benz C Class?

We will now move on to the section that certainly attracts you to this content page, namely, when replacing the brake discs of a Mercedes Benz C Class? How we revealed it to you just before, the brake discs and pads work in osmosis, nevertheless these two components are wearing auto parts and they will, with time and especially the friction when braking wears out and loses braking power. We will now highlight the different techniques to know when to replace them:

  • We consider that generally speaking the brake discs should be changed every 80, 000 – 100, 000 km on a Mercedes Benz C Class , nevertheless it is essential to know that dependent on your driving style and the type of journey this can change substantially. Indeed, if you mainly drive on the motorway and your brakes are only slightly used, this value can increase, in contrast, if you only drive in built-up areas, it can decrease.
  • A simple and good technique to find out the condition of the brake discs on your motor vehicle is during the technical inspection. Indeed this thorough control checks the state of your brakes and the controller will tell you if they are in good condition or need to be changed.
  • A basic visual technique to know when to replace the brake discs on your Mercedes Benz C Class is to remove the wheels after the vehicle has been set on stands. Once taken out, you will have the ability to access your discs and check their condition. If they have any big scratches or deformations you will have to replace them. In any other case the second indicator to check is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.

.

How to replace the brake discs on your Mercedes Benz C Class?

Finally, to end this content page we will quickly describe how to replace the brake discs of your Mercedes Benz C Class. You must know that if you replace the brake discs of your motor vehicle, you will absolutely have to change the brake pads of your Mercedes Benz C Class, don’t hesitate to consult our content page which explains you how to make this replace.
As far as changing discs is concerned, here are the most important steps to stick to:

  • Put your Mercedes Benz C Class on stands, take off the wheels you want to act on.
  • Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to make all your changes.
  • Using large Torx bits, remove the two nuts that lock the upper component of your brake caliper, remove it.
  • Remove your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you might need a mallet to remove the discs.
  • Replace the discs and tighten them with the new torx screws provided, replace your pads, reassemble the upper component of the caliper and tighten everything tightly.
  • Mounting your wheels, and remember to do a 500-kilometer brake break-in before braking hard.

To get more tips on the Mercedes Benz C Class, take a look at the Mercedes Benz C Class category.