The safety of a car is essential. Whether or not the Mazda Mx5 are financial holes, certain maintenance acts are crucial. Today we will explain to you when to replace the brake discs of your Mazda Mx5? To achieve this, first of all, we will see what the brake discs of your car are used for, then, when to replace the brake discs of your Mazda Mx5, and, finally, how to replace them with new ones.

change-brake-discs-mazda-mx5

Benefit of the brake discs of a Mazda Mx5

We start our content by explaining what the brake discs of a Mazda Mx5 are used for, it will enable you to discover why it is essential to make sure that they are constantly in good functioning conditions.
Brake discs are the main component of your braking system. In truth, braking on an Mazda Mx5 is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is placed on your wheel. When the brake pads will pinch the discs which will cause your Mazda Mx5 to brake.

When to replace the brake discs of a Mazda Mx5?

We will now proceed to the part that most certainly attracts you to this article, namely, when replacing the brake discs of a Mazda Mx5? How we explained it to you just before, the brake discs and pads work in osmosis, however these two components are wearing parts and they will, as time passes and specifically the friction when braking wears out and loses braking power. We will now outline the different methods to know when to replace them:

  • We consider that generally the brake discs should be changed every 80, 000 – 100, 000 km on a Mazda Mx5 , however it is essential to know that dependent on your driving style and the type of journey this can vary significantly. Indeed, if you principally drive on the motorway and your brakes are only slightly used, this amount can increase, alternatively, if you only drive in built-up areas, it can reduce.
  • A basic and powerful method to identify the state of the brake discs on your car is during the technical inspection. Indeed this thorough control checks the state of your brakes and the controller will tell you if they are in good state or need to be changed.
  • A simple visual method to know when to replace the brake discs on your Mazda Mx5 is to remove the wheels after the car has been set on stands. Once removed, you will be able to access your discs and verify their state. If they have any big scratches or deformations you will have to replace them. Otherwise the second indicator to check is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.

.

How to replace the brake discs on your Mazda Mx5?

Finally, to conclude this article we will quickly describe how to replace the brake discs of your Mazda Mx5. You must know that if you replace the brake discs of your motor vehicle, you will absolutely have to change the brake pads of your Mazda Mx5, don’t think twice to consult our article which points out you how to make this replace.
As far as changing discs is concerned, here are the main steps to follow:

  • Put your Mazda Mx5 on stands, take off the wheels you want to work on.
  • Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to produce all your changes.
  • Using large Torx bits, take out the two nuts that lock the upper component of your brake caliper, take out it.
  • Take out your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you might need a mallet to remove the discs.
  • Replace the discs and tighten them with the new torx screws provided, replace your pads, reassemble the upper component of the caliper and tighten everything tightly.
  • Mounting your wheels, and make sure to do a 500-kilometer brake break-in before braking hard.

If you wish more tutorials on the Mazda Mx5, go to our Mazda Mx5 category.