The safety of a motor vehicle is paramount. Whether or not the Mazda MX 5 Miata are financial holes, certain maintenance acts are essential. Today we will explain to you when to replace the brake discs of your Mazda MX 5 Miata? To get this done, to begin with, we will discover what the brake discs of your car are used for, then, when to replace the brake discs of your Mazda MX 5 Miata, and, finally, how to replace them with new ones.

change-brake-discs-mazda-mx-5-miata

Interest of the brake discs of a Mazda MX 5 Miata

We begin our article content by detailing what the brake discs of a Mazda MX 5 Miata are used for, it will enable you to discover why it is important to be sure that they are always in good working order.
Brake discs are the most important component of your braking system. Indeed, braking on an Mazda MX 5 Miata is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is attached to your wheel. When the brake pads will pinch the discs which will cause your Mazda MX 5 Miata to brake.

When to replace the brake discs of a Mazda MX 5 Miata?

We will now proceed to the section that certainly attracts you to this content page, namely, when replacing the brake discs of a Mazda MX 5 Miata? How we mentioned it to you just before, the brake discs and pads work in osmosis, however these two elements are wearing parts and they will, as time passes and especially the friction when braking wears out and loses braking power. We will now highlight the different techniques to know when to replace them:

  • We consider that generally the brake discs should be changed every 80, 000 – 100, 000 km on a Mazda MX 5 Miata , however it is important to know that based on your driving style and the type of journey this can change substantially. In truth, if you mainly drive on the motorway and your brakes are just slightly used, this value can increase, conversely, if you just drive in built-up areas, it can reduce.
  • A basic and effective technique to find out the condition of the brake discs on your motor vehicle is during the technical inspection. In truth this thorough control checks the state of your brakes and the controller will tell you if they are in good condition or need to be changed.
  • A simple visual technique to know when to replace the brake discs on your Mazda MX 5 Miata is to remove the wheels after the vehicle has been set on stands. Once removed, you will be able to access your discs and verify their condition. If they have any big scratches or deformations you will have to replace them. In any other case the second indicator to check is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.

.

How to replace the brake discs on your Mazda MX 5 Miata?

Finally, to end this content page we will fairly quickly show you how to replace the brake discs of your Mazda MX 5 Miata. You must know that if you replace the brake discs of your motor vehicle, you will absolutely have to change the brake pads of your Mazda MX 5 Miata, don’t think twice to consult our content page which teaches you how to make this replace.
As far as changing discs is concerned, here are the most important steps to follow:

  • Put your Mazda MX 5 Miata on stands, take off the wheels you want to action on.
  • Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to produce all your changes.
  • Using large Torx bits, take out the two nuts that lock the upper component of your brake caliper, take out it.
  • Take out your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you may possibly need a mallet to remove the discs.
  • Replace the discs and tighten them with the new torx screws provided, replace your pads, reassemble the upper component of the caliper and tighten everything tightly.
  • Mounting your wheels, and make sure to do a 500-kilometer brake break-in before braking hard.

To find more tips on the Mazda MX 5 Miata, take a look at the Mazda MX 5 Miata category.