The safety of a motor vehicle is essential. Even if the Lincoln MKC are economic holes, certain routine service works are indispensable. Today we will explain to you when to change the brake discs of your Lincoln MKC? To achieve this, first of all, we will see what the brake discs of your car are used for, then, when to change the brake discs of your Lincoln MKC, and, finally, how to replace them with new ones.
Benefit of the brake discs of a Lincoln MKC
We start our content page by explaining what the brake discs of a Lincoln MKC are used for, it will enable you to figure out why it is essential to ensure that that they are always in good working order.
Brake discs are the main component of your braking system. In fact, braking on an Lincoln MKC is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is attached to your wheel. When the brake pads will pinch the discs which will trigger your Lincoln MKC to brake.
When to change the brake discs of a Lincoln MKC?
We will now proceed to the part that most certainly attracts you to this content, namely, when changing the brake discs of a Lincoln MKC? How we revealed it to you just before, the brake discs and pads work in osmosis, nevertheless these two elements are wearing auto parts and they will, after some time and specifically the friction when braking wears out and loses braking power. We will now detail the different solutions to know when to replace them:
- We consider that generally the brake discs should be changed every 80, 000 – 100, 000 km on a Lincoln MKC , nevertheless it is essential to know that depending on your driving style and the type of journey this can vary considerably. In truth, if you principally drive on the motorway and your brakes are only slightly used, this value can increase, in contrast, if you only drive in built-up areas, it can reduce.
- A simple and powerful method to find out the state of the brake discs on your motor vehicle is during the technical inspection. In truth this thorough control checks the state of your brakes and the controller will tell you if they are in good state or need to be changed.
- A very easy visual method to know when to change the brake discs on your Lincoln MKC is to remove the wheels after the vehicle has been set on stands. Once taken out, you will have the ability to access your discs and verify their state. If they have any big scratches or deformations you will have to change them. Otherwise the second indicator to check is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.
.
How to change the brake discs on your Lincoln MKC?
Finally, to end this content we will quickly show you how to change the brake discs of your Lincoln MKC. You must know that if you change the brake discs of your car, you will absolutely have to change the brake pads of your Lincoln MKC, don’t think twice to seek advice from our content which teaches you how to make this change.
As far as changing discs is concerned, here are the main steps to stick to:
- Put your Lincoln MKC on stands, take off the wheels you want to work on.
- Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to produce all your changes.
- Using large Torx bits, take out the two nuts that lock the upper component of your brake caliper, take out it.
- Remove your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you might need a mallet to remove the discs.
- Replace the discs and tighten them with the new torx screws provided, change your pads, reassemble the upper component of the caliper and tighten everything tightly.
- Mounting your wheels, and make sure to do a 500-kilometer brake break-in before braking hard.
To discover more tips on the Lincoln MKC, take a look at the Lincoln MKC category.
