The safety of a motor vehicle is important. Even if the Lexus NX are economic holes, certain maintenance acts are crucial. In this article we will explain to you when to change the brake discs of your Lexus NX? To do this, to begin with, we will find out what the brake discs of your car are used for, then, when to change the brake discs of your Lexus NX, and, finally, how to change them with new ones.
Interest of the brake discs of a Lexus NX
We begin our article by explaining what the brake discs of a Lexus NX are used for, it will allow you to understand why it is important to be sure that they are constantly in good functioning conditions.
Brake discs are the main component of your braking system. In actual fact, braking on an Lexus NX is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is mounted on your wheel. When the brake pads will pinch the discs which will bring about your Lexus NX to brake.
When to change the brake discs of a Lexus NX?
We will now move on to the part that certainly attracts you to this content, namely, when changing the brake discs of a Lexus NX? How we revealed it to you just before, the brake discs and pads work in osmosis, however these two elements are wearing parts and they will, over time and specifically the friction when braking wears out and loses braking power. We will now highlight the different techniques to know when to change them:
- We consider that in general the brake discs should be changed every 80, 000 – 100, 000 km on a Lexus NX , however it is important to know that depending on your driving style and the type of journey this can change significantly. In fact, if you principally drive on the motorway and your brakes are just slightly used, this value can increase, alternatively, if you just drive in built-up areas, it can decrease.
- A simple and successful way to find out the condition of the brake discs on your motor vehicle is during the technical inspection. In fact this thorough control checks the state of your brakes and the controller will tell you if they are in good condition or need to be changed.
- A very easy visual way to know when to change the brake discs on your Lexus NX is to remove the wheels after the vehicle has been set on stands. Once taken off, you will have the ability to access your discs and check their condition. If they have any big scratches or deformations you will have to change them. In any other case the second indicator to check is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.
.
How to change the brake discs on your Lexus NX?
Finally, to end this content we will fairly quickly describe how to change the brake discs of your Lexus NX. You must know that if you change the brake discs of your motor vehicle, you will absolutely have to change the brake pads of your Lexus NX, don’t hesitate to consult our content which exposes you how to make this change.
As far as changing discs is concerned, here are the main steps to follow:
- Put your Lexus NX on stands, take off the wheels you want to action on.
- Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to produce all your changes.
- Using large Torx bits, take out the two nuts that lock the upper component of your brake caliper, take out it.
- Take out your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you might need a mallet to remove the discs.
- Replace the discs and tighten them with the new torx screws provided, change your pads, reassemble the upper component of the caliper and tighten everything tightly.
- Mounting your wheels, and make sure to do a 500-kilometer brake break-in before braking hard.
If you wish more guides on the Lexus NX, go to our Lexus NX category.
