The safety of a motor vehicle is essential. Whether or not the Land Rover Range Rover Sport are economic holes, certain routine service acts are essential. In this article we will explain to you when to change the brake discs of your Land Rover Range Rover Sport? To achieve this, to begin with, we will see what the brake discs of your motor vehicle are used for, then, when to change the brake discs of your Land Rover Range Rover Sport, and, finally, how to replace them with new ones.

change-brake-discs-land-rover-range-rover-sport

Interest of the brake discs of a Land Rover Range Rover Sport

We start our content page by detailing what the brake discs of a Land Rover Range Rover Sport are used for, it will enable you to figure out why it is important to be sure that they are constantly in good functioning order.
Brake discs are the most important component of your braking system. Obviously, braking on an Land Rover Range Rover Sport is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is mounted on your wheel. When the brake pads will pinch the discs which will bring about your Land Rover Range Rover Sport to brake.

When to change the brake discs of a Land Rover Range Rover Sport?

We will now move on to the section that undoubtedly attracts you to this content, namely, when replacing the brake discs of a Land Rover Range Rover Sport? How we revealed it to you just before, the brake discs and pads work in osmosis, nevertheless these two elements are wearing auto parts and they will, as time passes and specifically the friction when braking wears out and loses braking power. We will now detail the different ways to know when to replace them:

  • We consider that generally speaking the brake discs should be changed every 80, 000 – 100, 000 km on a Land Rover Range Rover Sport , nevertheless it is important to know that depending on your driving style and the type of journey this can change substantially. Indeed, if you mainly drive on the motorway and your brakes are only slightly used, this amount can increase, in contrast, if you only drive in built-up areas, it can decrease.
  • A basic and effective way to find out the state of the brake discs on your motor vehicle is during the technical inspection. Indeed this thorough control checks the state of your brakes and the controller will tell you if they are in good state or need to be changed.
  • A very easy visual way to know when to change the brake discs on your Land Rover Range Rover Sport is to remove the wheels after the car has been set on stands. Once taken out, you will be able to access your discs and verify their state. If they have any big scratches or deformations you will have to change them. Otherwise the second indicator to verify is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.

.

How to change the brake discs on your Land Rover Range Rover Sport?

Finally, to end this content we will quickly show you how to change the brake discs of your Land Rover Range Rover Sport. You must know that if you change the brake discs of your motor vehicle, you will absolutely have to change the brake pads of your Land Rover Range Rover Sport, don’t think twice to seek advice from our content which teaches you how to make this change.
As far as changing discs is concerned, here are the most important steps to follow:

  • Put your Land Rover Range Rover Sport on stands, take off the wheels you want to action on.
  • Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to make all your changes.
  • Using large Torx bits, remove the two nuts that lock the upper component of your brake caliper, remove it.
  • Remove your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you may possibly need a mallet to remove the discs.
  • Replace the discs and tighten them with the new torx screws provided, change your pads, reassemble the upper component of the caliper and tighten everything tightly.
  • Mounting your wheels, and remember to do a 500-kilometer brake break-in before braking hard.

If you want more tutorials on the Land Rover Range Rover Sport, go to our Land Rover Range Rover Sport category.