The safety of a car is paramount. Even if the Kia Rio 3 are economic holes, certain routine service acts are crucial. In this article we will explain to you when to replace the brake discs of your Kia Rio 3? To achieve this, first of all, we will see what the brake discs of your car are used for, then, when to replace the brake discs of your Kia Rio 3, and, finally, how to replace them with new ones.

change-brake-discs-kia-rio-3

Interest of the brake discs of a Kia Rio 3

We start our content by explaining what the brake discs of a Kia Rio 3 are used for, it will enable you to figure out why it is essential to make certain that they are constantly in good functioning order.
Brake discs are the main part of your braking system. Obviously, braking on an Kia Rio 3 is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is placed on your wheel. When the brake pads will pinch the discs which will trigger your Kia Rio 3 to brake.

When to replace the brake discs of a Kia Rio 3?

We will now proceed to the part that undoubtedly attracts you to this content page, namely, when changing the brake discs of a Kia Rio 3? How we described it to you just before, the brake discs and pads work in osmosis, however these two elements are wearing parts and they will, over time and specifically the friction when braking wears out and loses braking power. We will now detail the different methods to know when to replace them:

  • We consider that generally speaking the brake discs should be changed every 80, 000 – 100, 000 km on a Kia Rio 3 , however it is essential to know that dependent on your driving style and the type of journey this can change significantly. In truth, if you principally drive on the motorway and your brakes are only slightly used, this value can increase, alternatively, if you only drive in built-up areas, it can decrease.
  • A simple and successful method to find out the state of the brake discs on your car is during the technical inspection. In truth this thorough control checks the state of your brakes and the controller will tell you if they are in good state or need to be changed.
  • A very easy visual method to know when to replace the brake discs on your Kia Rio 3 is to remove the wheels after the vehicle has been set on stands. Once taken out, you will have the ability to access your discs and verify their state. If they have any big scratches or deformations you will have to replace them. In any other case the second indicator to verify is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.

.

How to replace the brake discs on your Kia Rio 3?

Finally, to end this content page we will quickly show you how to replace the brake discs of your Kia Rio 3. You must know that if you replace the brake discs of your motor vehicle, you will absolutely have to change the brake pads of your Kia Rio 3, don’t hesitate to seek advice from our content page which exposes you how to make this replace.
As far as changing discs is concerned, here are the main steps to stick to:

  • Put your Kia Rio 3 on stands, take off the wheels you want to act on.
  • Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to make all your changes.
  • Using large Torx bits, remove the two nuts that lock the upper part of your brake caliper, remove it.
  • Remove your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you may need a mallet to remove the discs.
  • Replace the discs and tighten them with the new torx screws provided, replace your pads, reassemble the upper part of the caliper and tighten everything tightly.
  • Mounting your wheels, and make sure to do a 500-kilometer brake break-in before braking hard.

If you need more guides on the Kia Rio 3, go to our Kia Rio 3 category.