The safety of a car is important. Even if the hyundai i10 are economic holes, certain routine service works are indispensable. Today we will explain to you when to change the brake discs of your hyundai i10? To get this done, first of all, we will discover what the brake discs of your motor vehicle are used for, then, when to change the brake discs of your hyundai i10, and, finally, how to replace them with new ones.
Interest of the brake discs of a hyundai i10
We begin our article by detailing what the brake discs of a hyundai i10 are used for, it will enable you to figure out why it is essential to ensure that that they are constantly in good working order.
Brake discs are the most important part of your braking system. In fact, braking on an hyundai i10 is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is attached to your wheel. When the brake pads will pinch the discs which will bring about your hyundai i10 to brake.
When to change the brake discs of a hyundai i10?
We will now move on to the section that undoubtedly attracts you to this content, namely, when changing the brake discs of a hyundai i10? How we mentioned it to you just before, the brake discs and pads work in osmosis, nevertheless these two elements are wearing auto parts and they will, over time and specifically the friction when braking wears out and loses braking power. We will now outline the different methods to know when to replace them:
- We consider that generally the brake discs should be changed every 80, 000 – 100, 000 km on a hyundai i10 , nevertheless it is essential to know that based on your driving style and the type of journey this can vary substantially. In truth, if you specifically drive on the motorway and your brakes are only slightly used, this amount can increase, alternatively, if you only drive in built-up areas, it can decrease.
- A simple and good method to find out the condition of the brake discs on your car is during the technical inspection. In truth this thorough control checks the state of your brakes and the controller will tell you if they are in good condition or need to be changed.
- A very easy visual method to know when to change the brake discs on your hyundai i10 is to remove the wheels after the car has been set on stands. Once removed, you will have the ability to access your discs and check their condition. If they have any big scratches or deformations you will have to change them. In any other case the second indicator to check is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.
.
How to change the brake discs on your hyundai i10?
Finally, to end this content we will fairly quickly show you how to change the brake discs of your hyundai i10. You must know that if you change the brake discs of your motor vehicle, you will absolutely have to change the brake pads of your hyundai i10, don’t hesitate to seek advice from our content which points out you how to make this change.
As far as changing discs is concerned, here are the most important steps to follow:
- Put your hyundai i10 on stands, take off the wheels you want to work on.
- Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to make all your changes.
- Using large Torx bits, take out the two nuts that lock the upper part of your brake caliper, take out it.
- Remove your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you may possibly need a mallet to remove the discs.
- Replace the discs and tighten them with the new torx screws provided, change your pads, reassemble the upper part of the caliper and tighten everything tightly.
- Mounting your wheels, and remember to do a 500-kilometer brake break-in before braking hard.
If you wish more guides on the hyundai i10, go to our hyundai i10 category.
