The safety of a car is essential. Even if the Ford Transit are economic holes, certain maintenance acts are essential. Today we will explain to you when to change the brake discs of your Ford Transit? To achieve this, to begin with, we will see what the brake discs of your car are used for, then, when to change the brake discs of your Ford Transit, and, finally, how to replace them with new ones.
Interest of the brake discs of a Ford Transit
We begin our content by explaining what the brake discs of a Ford Transit are used for, it will allow you to understand why it is essential to be sure that they are constantly in good working order.
Brake discs are the main component of your braking system. In truth, braking on an Ford Transit is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is placed on your wheel. When the brake pads will pinch the discs which will trigger your Ford Transit to brake.
When to change the brake discs of a Ford Transit?
We will now proceed to the part that certainly attracts you to this article, namely, when changing the brake discs of a Ford Transit? How we explained it to you just before, the brake discs and pads work in osmosis, nevertheless these two components are wearing auto parts and they will, as time passes and specifically the friction when braking wears out and loses braking power. We will now detail the different methods to know when to replace them:
- We consider that in general the brake discs should be changed every 80, 000 – 100, 000 km on a Ford Transit , nevertheless it is essential to know that dependent on your driving style and the type of journey this can change significantly. Indeed, if you specifically drive on the motorway and your brakes are just slightly used, this value can increase, on the other hand, if you just drive in built-up areas, it can reduce.
- A basic and good way to find out the state of the brake discs on your car is during the technical inspection. Indeed this thorough control checks the state of your brakes and the controller will tell you if they are in good state or need to be changed.
- A simple visual way to know when to change the brake discs on your Ford Transit is to remove the wheels after the vehicle has been set on stands. Once taken off, you will have the ability to access your discs and verify their state. If they have any big scratches or deformations you will have to change them. In any other case the second indicator to verify is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.
.
How to change the brake discs on your Ford Transit?
Finally, to end this article we will quickly explain how to change the brake discs of your Ford Transit. You must know that if you change the brake discs of your motor vehicle, you will absolutely have to change the brake pads of your Ford Transit, don’t think twice to seek advice from our article which teaches you how to make this change.
As far as changing discs is concerned, here are the main steps to stick to:
- Put your Ford Transit on stands, take off the wheels you want to act on.
- Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to produce all your changes.
- Using large Torx bits, take out the two nuts that lock the upper component of your brake caliper, take out it.
- Take out your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you may possibly need a mallet to remove the discs.
- Replace the discs and tighten them with the new torx screws provided, change your pads, reassemble the upper component of the caliper and tighten everything tightly.
- Mounting your wheels, and remember to do a 500-kilometer brake break-in before braking hard.
If you have any further questions about the Ford Transit, do not hesitate to consult our Ford Transit category.
