The safety of a motor vehicle is important. Even if the Ford F 450 are economic holes, certain maintenance acts are fundamental. Today we will explain to you when to replace the brake discs of your Ford F 450? To do this, to begin with, we will find out what the brake discs of your car are used for, then, when to replace the brake discs of your Ford F 450, and, finally, how to replace them with new ones.
Benefit of the brake discs of a Ford F 450
We start our content page by explaining what the brake discs of a Ford F 450 are used for, it will enable you to discover why it is essential to make certain that they are always in good working order.
Brake discs are the most important component of your braking system. In actual fact, braking on an Ford F 450 is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is mounted on your wheel. When the brake pads will pinch the discs which will cause your Ford F 450 to brake.
When to replace the brake discs of a Ford F 450?
We will now move on to the part that certainly attracts you to this article, namely, when replacing the brake discs of a Ford F 450? How we revealed it to you just before, the brake discs and pads work in osmosis, however these two elements are wearing parts and they will, after some time and specifically the friction when braking wears out and loses braking power. We will now outline the different techniques to know when to replace them:
- We consider that generally the brake discs should be changed every 80, 000 – 100, 000 km on a Ford F 450 , however it is essential to know that depending on your driving style and the type of journey this can vary considerably. In fact, if you principally drive on the motorway and your brakes are just slightly used, this amount can increase, conversely, if you just drive in built-up areas, it can decrease.
- A simple and effective technique to find out the state of the brake discs on your motor vehicle is during the technical inspection. In fact this thorough control checks the state of your brakes and the controller will tell you if they are in good state or need to be changed.
- A basic visual technique to know when to replace the brake discs on your Ford F 450 is to remove the wheels after the vehicle has been set on stands. Once taken off, you will have the ability to access your discs and check their state. If they have any big scratches or deformations you will have to replace them. In any other case the second indicator to check is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.
.
How to replace the brake discs on your Ford F 450?
Finally, to conclude this article we will quickly show you how to replace the brake discs of your Ford F 450. You must know that if you replace the brake discs of your car, you will absolutely have to change the brake pads of your Ford F 450, don’t think twice to consult our article which teaches you how to make this replace.
As far as changing discs is concerned, here are the most important steps to stick to:
- Put your Ford F 450 on stands, take off the wheels you want to work on.
- Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to make all your changes.
- Using large Torx bits, take out the two nuts that lock the upper component of your brake caliper, take out it.
- Remove your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you may need a mallet to remove the discs.
- Replace the discs and tighten them with the new torx screws provided, replace your pads, reassemble the upper component of the caliper and tighten everything tightly.
- Mounting your wheels, and remember to do a 500-kilometer brake break-in before braking hard.
If you need more guides on the Ford F 450, go to our Ford F 450 category.
