The safety of a motor vehicle is essential. Whether or not the Ford F 250 are economic holes, certain routine service actions are indispensable. Today we will explain to you when to change the brake discs of your Ford F 250? To achieve this, to begin with, we will discover what the brake discs of your motor vehicle are used for, then, when to change the brake discs of your Ford F 250, and, finally, how to replace them with new ones.
Interest of the brake discs of a Ford F 250
We start our content by explaining what the brake discs of a Ford F 250 are used for, it will enable you to discover why it is necessary to make certain that they are constantly in good working conditions.
Brake discs are the most important component of your braking system. Indeed, braking on an Ford F 250 is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is installed on your wheel. When the brake pads will pinch the discs which will bring about your Ford F 250 to brake.
When to change the brake discs of a Ford F 250?
We will now move on to the part that most certainly attracts you to this article, namely, when replacing the brake discs of a Ford F 250? How we explained it to you just before, the brake discs and pads work in osmosis, however these two components are wearing parts and they will, after some time and specifically the friction when braking wears out and loses braking power. We will now outline the different solutions to know when to replace them:
- We consider that generally the brake discs should be changed every 80, 000 – 100, 000 km on a Ford F 250 , however it is necessary to know that according to your driving style and the type of journey this can vary substantially. Indeed, if you specifically drive on the motorway and your brakes are just slightly used, this value can increase, alternatively, if you just drive in built-up areas, it can reduce.
- A basic and effective way to find out the state of the brake discs on your motor vehicle is during the technical inspection. Indeed this thorough control checks the state of your brakes and the controller will tell you if they are in good state or need to be changed.
- A simple visual way to know when to change the brake discs on your Ford F 250 is to remove the wheels after the vehicle has been set on stands. Once taken out, you will have the ability to access your discs and check their state. If they have any big scratches or deformations you will have to change them. In any other case the second indicator to verify is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.
.
How to change the brake discs on your Ford F 250?
Finally, to conclude this article we will quickly show you how to change the brake discs of your Ford F 250. You must know that if you change the brake discs of your motor vehicle, you will absolutely have to change the brake pads of your Ford F 250, don’t hesitate to consult our article which teaches you how to make this change.
As far as changing discs is concerned, here are the most important steps to stick to:
- Put your Ford F 250 on stands, take off the wheels you want to act on.
- Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to make all your changes.
- Using large Torx bits, remove the two nuts that lock the upper component of your brake caliper, remove it.
- Remove your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you may need a mallet to remove the discs.
- Replace the discs and tighten them with the new torx screws provided, change your pads, reassemble the upper component of the caliper and tighten everything tightly.
- Mounting your wheels, and make sure to do a 500-kilometer brake break-in before braking hard.
If you need more guides on the Ford F 250, go to our Ford F 250 category.
