The safety of a motor vehicle is important. Even if the Ford F 150 are economic holes, certain routine service works are fundamental. Today we will explain to you when to change the brake discs of your Ford F 150 ? To get this done, to begin with, we will discover what the brake discs of your car are used for, then, when to change the brake discs of your Ford F 150 , and, finally, how to replace them with new ones.
Benefit of the brake discs of a Ford F 150
We begin our article content by explaining what the brake discs of a Ford F 150 are used for, it will allow you to figure out why it is essential to make sure that they are constantly in good functioning order.
Brake discs are the main part of your braking system. In actual fact, braking on an Ford F 150 is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is installed on your wheel. When the brake pads will pinch the discs which will trigger your Ford F 150 to brake.
When to change the brake discs of a Ford F 150 ?
We will now proceed to the part that certainly attracts you to this content, namely, when changing the brake discs of a Ford F 150 ? How we revealed it to you just before, the brake discs and pads work in osmosis, however these two elements are wearing auto parts and they will, with time and especially the friction when braking wears out and loses braking power. We will now outline the different solutions to know when to replace them:
- We consider that in general the brake discs should be changed every 80, 000 – 100, 000 km on a Ford F 150 , however it is essential to know that depending on your driving style and the type of journey this can vary considerably. In truth, if you mainly drive on the motorway and your brakes are just slightly used, this amount can increase, conversely, if you just drive in built-up areas, it can decrease.
- A basic and powerful method to find out the state of the brake discs on your motor vehicle is during the technical inspection. In truth this thorough control checks the state of your brakes and the controller will tell you if they are in good state or need to be changed.
- A very easy visual method to know when to change the brake discs on your Ford F 150 is to remove the wheels after the vehicle has been set on stands. Once taken off, you will have the ability to access your discs and verify their state. If they have any big scratches or deformations you will have to change them. Otherwise the second indicator to check is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.
.
How to change the brake discs on your Ford F 150 ?
Finally, to end this content we will fairly quickly describe how to change the brake discs of your Ford F 150 . You must know that if you change the brake discs of your motor vehicle, you will absolutely have to change the brake pads of your Ford F 150 , don’t hesitate to consult our content which explains you how to make this change.
As far as changing discs is concerned, here are the main steps to follow:
- Put your Ford F 150 on stands, take off the wheels you want to act on.
- Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to produce all your changes.
- Using large Torx bits, remove the two nuts that lock the upper part of your brake caliper, remove it.
- Take out your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you may possibly need a mallet to remove the discs.
- Replace the discs and tighten them with the new torx screws provided, change your pads, reassemble the upper part of the caliper and tighten everything tightly.
- Mounting your wheels, and make sure to do a 500-kilometer brake break-in before braking hard.
If you have any additional questions about the Ford F 150 , do not hesitate to consult our Ford F 150 category.
