The safety of a car is important. Whether or not the Ford B-max are economic holes, certain maintenance works are crucial. In this article we will explain to you when to replace the brake discs of your Ford B-max? To achieve this, to begin with, we will see what the brake discs of your car are used for, then, when to replace the brake discs of your Ford B-max, and, finally, how to replace them with new ones.
Benefit of the brake discs of a Ford B-max
We start our guideline by explaining what the brake discs of a Ford B-max are used for, it will allow you to discover why it is important to ensure that that they are constantly in good functioning order.
Brake discs are the main component of your braking system. In truth, braking on an Ford B-max is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is installed on your wheel. When the brake pads will pinch the discs which will cause your Ford B-max to brake.
When to replace the brake discs of a Ford B-max?
We will now move on to the section that undoubtedly attracts you to this content page, namely, when replacing the brake discs of a Ford B-max? How we described it to you just before, the brake discs and pads work in osmosis, nevertheless these two components are wearing parts and they will, over time and especially the friction when braking wears out and loses braking power. We will now highlight the different methods to know when to replace them:
- We consider that in general the brake discs should be changed every 80, 000 – 100, 000 km on a Ford B-max , nevertheless it is important to know that depending on your driving style and the type of journey this can change significantly. In truth, if you principally drive on the motorway and your brakes are just slightly used, this value can increase, alternatively, if you just drive in built-up areas, it can reduce.
- A simple and powerful way to identify the condition of the brake discs on your car is during the technical inspection. In truth this thorough control checks the state of your brakes and the controller will tell you if they are in good condition or need to be changed.
- A very easy visual way to know when to replace the brake discs on your Ford B-max is to remove the wheels after the car has been set on stands. Once removed, you will have the ability to access your discs and check their condition. If they have any big scratches or deformations you will have to replace them. Otherwise the second indicator to check is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.
.
How to replace the brake discs on your Ford B-max?
Finally, to conclude this content page we will fairly quickly describe how to replace the brake discs of your Ford B-max. You must know that if you replace the brake discs of your car, you will absolutely have to change the brake pads of your Ford B-max, don’t think twice to seek advice from our content page which points out you how to make this replace.
As far as changing discs is concerned, here are the main steps to follow:
- Put your Ford B-max on stands, take off the wheels you want to action on.
- Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to make all your changes.
- Using large Torx bits, remove the two nuts that lock the upper component of your brake caliper, remove it.
- Remove your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you might need a mallet to remove the discs.
- Replace the discs and tighten them with the new torx screws provided, replace your pads, reassemble the upper component of the caliper and tighten everything tightly.
- Mounting your wheels, and make sure to do a 500-kilometer brake break-in before braking hard.
If you want more guides on the Ford B-max, go to our Ford B-max category.
