The safety of a motor vehicle is very important. Whether or not the Fiat 500 are economic holes, certain routine service actions are crucial. In this article we will explain to you when to change the brake discs of your Fiat 500? To accomplish this, first of all, we will see what the brake discs of your motor vehicle are used for, then, when to change the brake discs of your Fiat 500, and, finally, how to change them with new ones.
Benefit of the brake discs of a Fiat 500
We begin our content by detailing what the brake discs of a Fiat 500 are used for, it will allow you to understand why it is important to be sure that they are always in good functioning order.
Brake discs are the most important part of your braking system. Indeed, braking on an Fiat 500 is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is attached to your wheel. When the brake pads will pinch the discs which will cause your Fiat 500 to brake.
When to change the brake discs of a Fiat 500?
We will now move on to the section that certainly attracts you to this content page, namely, when changing the brake discs of a Fiat 500? How we revealed it to you just before, the brake discs and pads work in osmosis, nevertheless these two elements are wearing auto parts and they will, as time passes and specifically the friction when braking wears out and loses braking power. We will now detail the different methods to know when to change them:
- We consider that generally speaking the brake discs should be changed every 80, 000 – 100, 000 km on a Fiat 500 , nevertheless it is important to know that according to your driving style and the type of journey this can vary significantly. In fact, if you principally drive on the motorway and your brakes are just slightly used, this amount can increase, conversely, if you just drive in built-up areas, it can decrease.
- A basic and effective way to identify the condition of the brake discs on your motor vehicle is during the technical inspection. In fact this thorough control checks the state of your brakes and the controller will tell you if they are in good condition or need to be changed.
- A simple visual way to know when to change the brake discs on your Fiat 500 is to remove the wheels after the vehicle has been set on stands. Once removed, you will have the ability to access your discs and verify their condition. If they have any big scratches or deformations you will have to change them. In any other case the second indicator to verify is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.
.
How to change the brake discs on your Fiat 500?
Finally, to end this content page we will fairly quickly describe how to change the brake discs of your Fiat 500. You must know that if you change the brake discs of your motor vehicle, you will absolutely have to change the brake pads of your Fiat 500, don’t hesitate to seek advice from our content page which exposes you how to make this change.
As far as changing discs is concerned, here are the most important steps to stick to:
- Put your Fiat 500 on stands, take off the wheels you want to work on.
- Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to make all your changes.
- Using large Torx bits, remove the two nuts that lock the upper part of your brake caliper, remove it.
- Remove your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you may need a mallet to remove the discs.
- Replace the discs and tighten them with the new torx screws provided, change your pads, reassemble the upper part of the caliper and tighten everything tightly.
- Mounting your wheels, and remember to do a 500-kilometer brake break-in before braking hard.
To get more tips on the Fiat 500, take a look at the Fiat 500 category.
