The safety of a motor vehicle is paramount. Even if the Ds Ds 3 Crossback are economic holes, certain maintenance actions are essential. Today we will explain to you when to change the brake discs of your Ds Ds 3 Crossback? To achieve this, first of all, we will find out what the brake discs of your motor vehicle are used for, then, when to change the brake discs of your Ds Ds 3 Crossback, and, finally, how to change them with new ones.

change-brake-discs-ds-ds3-crossback

Interest of the brake discs of a Ds Ds 3 Crossback

We start our article content by explaining what the brake discs of a Ds Ds 3 Crossback are used for, it will enable you to discover why it is important to be certain that they are constantly in good working order.
Brake discs are the main part of your braking system. Indeed, braking on an Ds Ds 3 Crossback is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is mounted on your wheel. When the brake pads will pinch the discs which will cause your Ds Ds 3 Crossback to brake.

When to change the brake discs of a Ds Ds 3 Crossback?

We will now proceed to the section that undoubtedly attracts you to this content, namely, when changing the brake discs of a Ds Ds 3 Crossback? How we mentioned it to you just before, the brake discs and pads work in osmosis, nevertheless these two components are wearing parts and they will, as time passes and specifically the friction when braking wears out and loses braking power. We will now highlight the different ways to know when to change them:

  • We consider that generally the brake discs should be changed every 80, 000 – 100, 000 km on a Ds Ds 3 Crossback , nevertheless it is important to know that according to your driving style and the type of journey this can change considerably. Indeed, if you principally drive on the motorway and your brakes are just slightly used, this value can increase, conversely, if you just drive in built-up areas, it can reduce.
  • A simple and good technique to identify the condition of the brake discs on your motor vehicle is during the technical inspection. Indeed this thorough control checks the state of your brakes and the controller will tell you if they are in good condition or need to be changed.
  • A very easy visual technique to know when to change the brake discs on your Ds Ds 3 Crossback is to remove the wheels after the vehicle has been set on stands. Once taken off, you will be able to access your discs and verify their condition. If they have any big scratches or deformations you will have to change them. In any other case the second indicator to check is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.

.

How to change the brake discs on your Ds Ds 3 Crossback?

Finally, to conclude this content we will quickly explain how to change the brake discs of your Ds Ds 3 Crossback. You must know that if you change the brake discs of your car, you will absolutely have to change the brake pads of your Ds Ds 3 Crossback, don’t hesitate to consult our content which teaches you how to make this change.
As far as changing discs is concerned, here are the main steps to stick to:

  • Put your Ds Ds 3 Crossback on stands, take off the wheels you want to act on.
  • Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to produce all your changes.
  • Using large Torx bits, take out the two nuts that lock the upper part of your brake caliper, take out it.
  • Remove your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you might need a mallet to remove the discs.
  • Replace the discs and tighten them with the new torx screws provided, change your pads, reassemble the upper part of the caliper and tighten everything tightly.
  • Mounting your wheels, and make sure to do a 500-kilometer brake break-in before braking hard.

To get more tips on the Ds Ds 3 Crossback, take a look at the Ds Ds 3 Crossback category.