The safety of a car is important. Whether or not the Chevrolet Camaro are economic holes, certain maintenance acts are vital. In this article we will explain to you when to replace the brake discs of your Chevrolet Camaro? To get this done, to begin with, we will see what the brake discs of your motor vehicle are used for, then, when to replace the brake discs of your Chevrolet Camaro, and, finally, how to replace them with new ones.

change-brake-discs-chevrolet-camaro

Interest of the brake discs of a Chevrolet Camaro

We start our article content by detailing what the brake discs of a Chevrolet Camaro are used for, it will enable you to figure out why it is essential to be sure that they are constantly in good functioning conditions.
Brake discs are the most important part of your braking system. In fact, braking on an Chevrolet Camaro is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is placed on your wheel. When the brake pads will pinch the discs which will trigger your Chevrolet Camaro to brake.

When to replace the brake discs of a Chevrolet Camaro?

We will now move on to the section that undoubtedly attracts you to this content page, namely, when replacing the brake discs of a Chevrolet Camaro? How we explained it to you just before, the brake discs and pads work in osmosis, however these two components are wearing parts and they will, over time and especially the friction when braking wears out and loses braking power. We will now outline the different ways to know when to replace them:

  • We consider that generally the brake discs should be changed every 80, 000 – 100, 000 km on a Chevrolet Camaro , however it is essential to know that dependent on your driving style and the type of journey this can change considerably. In fact, if you specifically drive on the motorway and your brakes are just slightly used, this amount can increase, on the other hand, if you just drive in built-up areas, it can decrease.
  • A basic and successful technique to identify the condition of the brake discs on your car is during the technical inspection. In fact this thorough control checks the state of your brakes and the controller will tell you if they are in good condition or need to be changed.
  • A very easy visual technique to know when to replace the brake discs on your Chevrolet Camaro is to remove the wheels after the vehicle has been set on stands. Once taken off, you will have the ability to access your discs and verify their condition. If they have any big scratches or deformations you will have to replace them. Otherwise the second indicator to verify is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.

.

How to replace the brake discs on your Chevrolet Camaro?

Finally, to end this content page we will quickly show you how to replace the brake discs of your Chevrolet Camaro. You must know that if you replace the brake discs of your motor vehicle, you will absolutely have to change the brake pads of your Chevrolet Camaro, don’t think twice to seek advice from our content page which explains you how to make this replace.
As far as changing discs is concerned, here are the most important steps to follow:

  • Put your Chevrolet Camaro on stands, take off the wheels you want to act on.
  • Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to produce all your changes.
  • Using large Torx bits, remove the two nuts that lock the upper part of your brake caliper, remove it.
  • Remove your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you might need a mallet to remove the discs.
  • Replace the discs and tighten them with the new torx screws provided, replace your pads, reassemble the upper part of the caliper and tighten everything tightly.
  • Mounting your wheels, and make sure to do a 500-kilometer brake break-in before braking hard.

If you need more tutorials on the Chevrolet Camaro, go to our Chevrolet Camaro category.