The safety of a motor vehicle is important. Even if the Audi Sq7 are economic holes, certain maintenance acts are crucial. Today we will explain to you when to change the brake discs of your Audi Sq7? To do this, first of all, we will discover what the brake discs of your motor vehicle are used for, then, when to change the brake discs of your Audi Sq7, and, finally, how to replace them with new ones.
Interest of the brake discs of a Audi Sq7
We start our content page by detailing what the brake discs of a Audi Sq7 are used for, it will enable you to discover why it is essential to make certain that they are constantly in good functioning order.
Brake discs are the main component of your braking system. In truth, braking on an Audi Sq7 is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is installed on your wheel. When the brake pads will pinch the discs which will cause your Audi Sq7 to brake.
When to change the brake discs of a Audi Sq7?
We will now proceed to the part that undoubtedly attracts you to this article, namely, when replacing the brake discs of a Audi Sq7? How we revealed it to you just before, the brake discs and pads work in osmosis, nevertheless these two elements are wearing auto parts and they will, after some time and specifically the friction when braking wears out and loses braking power. We will now outline the different techniques to know when to replace them:
- We consider that generally speaking the brake discs should be changed every 80, 000 – 100, 000 km on a Audi Sq7 , nevertheless it is essential to know that dependent on your driving style and the type of journey this can change substantially. Indeed, if you principally drive on the motorway and your brakes are just slightly used, this value can increase, in contrast, if you just drive in built-up areas, it can decrease.
- A basic and powerful technique to identify the condition of the brake discs on your motor vehicle is during the technical inspection. Indeed this thorough control checks the state of your brakes and the controller will tell you if they are in good condition or need to be changed.
- A very easy visual technique to know when to change the brake discs on your Audi Sq7 is to remove the wheels after the car has been set on stands. Once taken off, you will have the ability to access your discs and verify their condition. If they have any big scratches or deformations you will have to change them. Otherwise the second indicator to verify is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.
.
How to change the brake discs on your Audi Sq7?
Finally, to conclude this article we will fairly quickly explain how to change the brake discs of your Audi Sq7. You must know that if you change the brake discs of your car, you will absolutely have to change the brake pads of your Audi Sq7, don’t think twice to seek advice from our article which explains you how to make this change.
As far as changing discs is concerned, here are the main steps to follow:
- Put your Audi Sq7 on stands, take off the wheels you want to act on.
- Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to make all your changes.
- Using large Torx bits, remove the two nuts that lock the upper component of your brake caliper, remove it.
- Take out your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you may possibly need a mallet to remove the discs.
- Replace the discs and tighten them with the new torx screws provided, change your pads, reassemble the upper component of the caliper and tighten everything tightly.
- Mounting your wheels, and make sure to do a 500-kilometer brake break-in before braking hard.
To get more tips on the Audi Sq7, take a look at the Audi Sq7 category.
