The safety of a car is important. Even if the Audi Q5 are financial holes, certain maintenance works are vital. Today we will explain to you when to change the brake discs of your Audi Q5? To achieve this, first of all, we will find out what the brake discs of your motor vehicle are used for, then, when to change the brake discs of your Audi Q5, and, finally, how to change them with new ones.
Benefit of the brake discs of a Audi Q5
We begin our article content by explaining what the brake discs of a Audi Q5 are used for, it will allow you to figure out why it is important to ensure that that they are constantly in good functioning conditions.
Brake discs are the main part of your braking system. In truth, braking on an Audi Q5 is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is placed on your wheel. When the brake pads will pinch the discs which will bring about your Audi Q5 to brake.
When to change the brake discs of a Audi Q5?
We will now proceed to the section that certainly attracts you to this content page, namely, when changing the brake discs of a Audi Q5? How we mentioned it to you just before, the brake discs and pads work in osmosis, nevertheless these two elements are wearing auto parts and they will, as time passes and specifically the friction when braking wears out and loses braking power. We will now detail the different solutions to know when to change them:
- We consider that in general the brake discs should be changed every 80, 000 – 100, 000 km on a Audi Q5 , nevertheless it is important to know that based on your driving style and the type of journey this can vary substantially. Indeed, if you principally drive on the motorway and your brakes are only slightly used, this amount can increase, in contrast, if you only drive in built-up areas, it can decrease.
- A simple and successful technique to find out the state of the brake discs on your car is during the technical inspection. Indeed this thorough control checks the state of your brakes and the controller will tell you if they are in good state or need to be changed.
- A basic visual technique to know when to change the brake discs on your Audi Q5 is to remove the wheels after the vehicle has been set on stands. Once removed, you will have the ability to access your discs and verify their state. If they have any big scratches or deformations you will have to change them. In any other case the second indicator to verify is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.
.
How to change the brake discs on your Audi Q5?
Finally, to conclude this content page we will fairly quickly describe how to change the brake discs of your Audi Q5. You must know that if you change the brake discs of your motor vehicle, you will absolutely have to change the brake pads of your Audi Q5, don’t think twice to consult our content page which teaches you how to make this change.
As far as changing discs is concerned, here are the main steps to stick to:
- Put your Audi Q5 on stands, take off the wheels you want to action on.
- Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to make all your changes.
- Using large Torx bits, take out the two nuts that lock the upper part of your brake caliper, take out it.
- Remove your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you might need a mallet to remove the discs.
- Replace the discs and tighten them with the new torx screws provided, change your pads, reassemble the upper part of the caliper and tighten everything tightly.
- Mounting your wheels, and make sure to do a 500-kilometer brake break-in before braking hard.
If you have any additional questions about the Audi Q5, do not hesitate to consult our Audi Q5 category.
