The safety of a motor vehicle is essential. Regardless if the Acura ILX are economic holes, certain maintenance actions are vital. In this article we will explain to you when to replace the brake discs of your Acura ILX? To do this, first of all, we will find out what the brake discs of your motor vehicle are used for, then, when to replace the brake discs of your Acura ILX, and, finally, how to replace them with new ones.
Interest of the brake discs of a Acura ILX
We begin our article content by detailing what the brake discs of a Acura ILX are used for, it will allow you to understand why it is essential to be sure that they are constantly in good working conditions.
Brake discs are the main component of your braking system. In actual fact, braking on an Acura ILX is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is placed on your wheel. When the brake pads will pinch the discs which will bring about your Acura ILX to brake.
When to replace the brake discs of a Acura ILX?
We will now proceed to the section that undoubtedly attracts you to this article, namely, when changing the brake discs of a Acura ILX? How we described it to you just before, the brake discs and pads work in osmosis, nevertheless these two components are wearing auto parts and they will, with time and specifically the friction when braking wears out and loses braking power. We will now outline the different methods to know when to replace them:
- We consider that generally the brake discs should be changed every 80, 000 – 100, 000 km on a Acura ILX , nevertheless it is essential to know that depending on your driving style and the type of journey this can change substantially. Indeed, if you principally drive on the motorway and your brakes are only slightly used, this value can increase, on the other hand, if you only drive in built-up areas, it can decrease.
- A simple and effective technique to find out the condition of the brake discs on your motor vehicle is during the technical inspection. Indeed this thorough control checks the state of your brakes and the controller will tell you if they are in good condition or need to be changed.
- A very easy visual technique to know when to replace the brake discs on your Acura ILX is to remove the wheels after the car has been set on stands. Once taken off, you will have the ability to access your discs and verify their condition. If they have any big scratches or deformations you will have to replace them. In any other case the second indicator to check is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.
.
How to replace the brake discs on your Acura ILX?
Finally, to end this article we will quickly explain how to replace the brake discs of your Acura ILX. You must know that if you replace the brake discs of your car, you will absolutely have to change the brake pads of your Acura ILX, don’t hesitate to consult our article which teaches you how to make this replace.
As far as changing discs is concerned, here are the main steps to stick to:
- Put your Acura ILX on stands, take off the wheels you want to act on.
- Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to produce all your changes.
- Using large Torx bits, remove the two nuts that lock the upper component of your brake caliper, remove it.
- Remove your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you may need a mallet to remove the discs.
- Replace the discs and tighten them with the new torx screws provided, replace your pads, reassemble the upper component of the caliper and tighten everything tightly.
- Mounting your wheels, and make sure to do a 500-kilometer brake break-in before braking hard.
If you need more tutorials on the Acura ILX, go to our Acura ILX category.
