One of the most irritating concerns that can appear on a Jeep Wrangler is to observe its temperature gauge increasing. In fact, a gauge that rises above 90/100° is commonly an indicator that your Jeep Wrangler is heating up. If you are in this case, you have done well to check out this web page link because we will help you to situate the cause and understand the trigger. To achieve this, first of all, we will take a look at the explanations for engine overheating and the risks you run, and secondly, what possibilities are available to you to get rid of this phenomenon.

causes-overheatingjeep-wrangler

Why is my Jeep Wrangler overheating? What are the risks?

A Jeep Wrangler that heats up is a symptom of a significant issue. You should not think that you will deal with it later because, if you do, you risk irreversibly injuring the engine of your car. In reality, if your Jeep Wrangler heats up, and you keep driving, you basically risk the breakage of your car engine. An internal combustion engine works through combustion, which triggers heat. This heat must be regulated because it can damage the engine parts. If you see white smoke starting to come out of your engine and you undergo a loss of power, your Jeep Wrangler is heating up and you are injuring your engine, you must stop.

What are the causes of an heating up Jeep Wrangler ?

  • A leak in the cooling system

    If you on a regular basis run out of coolant and refill your system frequently, you could have a leak, so have your system inspected for leaks. It is also conceivable that it is your cylinder head gasket that is defective, in which particular case you should detect “mayonnaise” in the area of your engine oil cap.
  • A dead calorstat
    The task of this part is to switch on the engine cooling only when the engine is at optimum temperature, if it is damaged, the coolant will never reach the engine and your Jeep Wrangler will heat up. Check its condition.
  • A blocked radiator
    Although this scenario is not so common, if your radiator is very dirty, or clogged with impure substances, its cooling fins will no longer conduct their role and on hot days your Jeep Wrangler may overheat.
  • A fan that no longer operates
    Be sure you check the state and performance of your fan, furthermore to the air produced by the speed of your Jeep Wrangler, it has a decisive role in cooling your engine when it has to be the relay when you drive slower. In case of a breakdown and travelling at low speed, your car will inescapably heat up.
  • A damaged water pump
    To finish , it is conceivable that your water pump is at the end of its life. In reality, its job is to rotate the coolant throughout the circuit, in the event of failure this operation stops and your Jeep Wrangler heats up. This may be because of a faulty belt that has harmed your pump. If this is your case, go to your garage area.

How can I fix the issue of an heating up Jeep Wrangler?

Furthermore to having inspected all the auto parts that may be causing your Jeep Wrangler to heat up, you will have to make the right resolutions to limit the risks in case your automobile gets hot and you have no other alternative than to go home, or to go to your mechanic.
Here are a few tips if your car is overheating:

  • Lower your engine speed but not your speed:
    Reducing your engine speed will allow you to limit the heat released by the engine. On the other hand, try to stay in 5th gear at 70/80 km/h in order to have a large natural airflow to control the heating of your Jeep Wrangler.
  • Stop the engine of your Jeep Wrangler if you meet or exceed 100°:
    Don’t be in a rush, in a case of overheating, it is better to take breaks and let the engine cool down rather than pushing it and risking breakage.
  • Turn on your heater:
    Turning on the heater will let you to evacuate some of the heat from the engine block, it is an useful remedy. And conversely, turn off your air conditioner which produces heat.

If you want more tutorials on the Jeep Wrangler, go to our Jeep Wrangler category.