Do you have the feeling of a power drop without any logical explanation, and all this happens in an unforeseen or usual way? Maybe it’s because your Volvo V60 is going to limp mode . In reality, the safety mode can be activated on a car for a number of factors and the activation of this mode will set the engine’s performance, sometimes causing a momentary or irreversible loss of power from your Volvo V60 until you fix the issue. Our publishers wanted to compose this guidebook so that you can fix this matter, which is very embarrassing and can be dangerous for you and the rest of the drivers. In order to treat these issues, we will concentrate on the limp mode of your Volvo V60. And secondly, what are the factors why your Volvo V60 goes into safety mode?

limp-mode-volvo-v60

Volvo V60 THAT GOES TO limp mode: WHAT IS IT?

Let’s start our content page with the definition of your Volvo V60 that goes to limp mode . You probably won’t have any info about the fact that this mode has been turned on and you will just experience the results. Usually the clues of a safety mode on your Volvo V60 will be that you will perceive an identifiable loss of power, you should not be able to exceed 3000 rpm which makes the use of your Volvo V60 more than difficult. Furthermore to the power loss, you may have an amber warning light on your speedometer which will appear on the screen to suggest that you go to your auto mechanic to handle the issue as quickly as possible. In fact, via your vehicle’s ECU and the various sensors that continuously monitor the procedure of your engine, your Volvo V60 that goes to safety is in fact a kind of electronic flange of your engine. Nevertheless, you must be worried about this quickly because it probably hides a concern that needs to be dealt with, however, specifically with time, certain components such as the EGR valve, the catalytic converter or the particle filter will become clogged and will age much more quickly. In some situations, simply turning your Volvo V60 off and on again will be enough to turn off the safety mode, in other cases the original concern must be fixed to return to regular behaviour.

Why is my Volvo V60 going into limp mode?

Now we’re going to detail the factors why your Volvo V60 is on limp mode. First of all you can easily check whether this is the case by using your diagnostic plug and Volvo V60reading the fault codes of your Volvo V60. Please have a look at our specific guideline which shows you how to use these tools and translate the fault codes of your Volvo V60 yourself. You should find out a fault code displayed due to an engine component. Based on the finish of your car the on-board computer will as well tell you that you are in safety mode. We will then discover most of the parts that can produce your Volvo V60 safe.

  • Turbo: A faulty turbo will immediately inform your computer and produce your car safe.
  • The EGR valve: If your vehicle is ever used in a really quiet way or just for short trips at low speed, it will sometimes clog up and trigger the safety mode to be activated.
  • The Particle Filter: A part famous for the problems it triggers, in the event that your PAP is clogged, you will be subject to a safety shutdown of your Volvo V60 just because your engine will not be able to effectively exhaust the exhaust gases.
  • The flow meter: Finally, the flow meter is the last of the established causes of an Volvo V60 going into safety. In fact, if it doesn’t manage the air/fuel mixture effectively, your ECU will know the problem instantly.

In case you have any other worries or questions about your car, you can certainly locate the solution in our Volvo V60 Guide.

In the event that you have any additional questions about the Volvo V60, do not hesitate to consult our Volvo V60 category.