Taking care of your car is very important in these modern times, in fact, if you do not do the minimal routine service of it, or if you do not take into consideration signs of unusualness, you firmly risk to see your car withering away. This is exactly the subject we are going to focus on on this webpage, one of the indications that most interferes with motorists is the seat belt indicator light on Land Rover Discovery . In an effort to help you analyze this warning light, first we will see what this belt warning light on Land Rover Discovery points, then in a second how to proceed if the seat belt warning light stays on and beeps on Land Rover Discovery? .
Seat belt indicator light on Land Rover Discovery
So we begin with the content about the safety belt light on Land Rover Discovery . This or these lights, depending on the series of your motor vehicle, you may just have one or one per seat, will have the task of notifying the driver and reminding passengers to fasten their seat belts . It will activate when the ignition of your Land Rover Discovery is turned on. It can be combined with presence sensor , which thanks to a weight sensor will have the ability to sense the presence or not of a passenger on the seats. Please take note that you are obliged by the Highway Code, as well as your passengers, to wear seatbelts in any moving vehicle, it is for your safety, so this warning light is a good way to avoid putting yourself in danger. This seat belt warning light can be combined with a beeper , to ensure that you are aware of the omission.
Why does the seat belt light turn on at Land Rover Discovery?
We will now proceed to the abnormal reasons for the belt light to switch on Land Rover Discovery . In time, it should just be illuminated if a passenger sitting in a seat has not fastened his belt, here is a list of the different problems you may have with your belt indicator:
- The seat belt indicator lights up unintentionally with or without the buzzer alarm although the seat belts are effectively fastened although you are driving in your Land Rover Discovery, in such a case it is possible that the buckle sensor is defective
- The Land Rover Discovery belt warning light is illuminated on an empty seat: In this case, it is most likely that the presence sensor is defective.
- The seat belt indicator light stays on and there’s no audible alarm: It could be the light or the fuse that’s the problem if all the belts in the occupied seats are effectively locked.
.
What if the seat belt light wont come off on Land Rover Discovery?
Now that we have the problems that you may have with your seat belt light that stays on your Land Rover Discovery , we will try to give you the solutions that you can solve it and turn off the belt light on the dashboard of your Land Rover Discovery .
- Presence sensor problem: : In the event you have been able to determine that your light problem is caused by a presence sensor, you will need to verify that there is no weight on your seats, as occasionally a simple shopping bag can induce the sensor and light up the belt light on your Land Rover Discovery. If you don’t have anything on your seats and your sensors are defective, you will have to go to a technician to have it replaced by a new one, the sensors generally cost between 50 and 100 euros. between 50 and 100 euros.
- Belt Buckle Sensor Trouble: If the belt buckle sensor is not operating correctly, you should have the indicator light illuminated inopportunely. Try to move it to see if something is blocking it, in any other case you will have to replace it, you can discover some in motor vehicle breakage, in any other case you will have to count 100aine of euros .
- Finally, if the light is producing your problems, you’ll need to check out your Land Rover Discovery’s interior fuse box.
.
If perhaps you have any further questions about the Land Rover Discovery, do not hesitate to consult our Land Rover Discovery category.
