In this article we are going to look at a problem that may prove to be unsafe. If you detect any handling or grip problems on your Toyota Sequoia , it is important that you drive cautiously and manage it fairly quickly. Our team has written this content to help you fix them. First, we’ll fairly quickly check out the essential elements that assure effective road handling, then we’ll check out why your Toyota Sequoia doesn’t hold the road any more, and finally we’ll check out how to fix your grip problems.

problem-road-handling-toyota-sequoia

What are the main components that assure great road holding and handling on a Toyota Sequoia?

We commence this content page by fairly quickly describing the main elements that will guarantee good road holding for your Toyota Sequoia. It’s important to know that a vehicle’s grip is a science in itself. It will therefore depend on many elements, we will explain down below the main ones that can be influenced:

  • Shock absorbers: The main elements of your road handling, they permanently guarantee the contact between the wheels and the road. They absorb all shocks and holes on the road.
  • Tyres: They are the ones that will guarantee the grip of your Toyota Sequoia on the road, the softer they are, the more grip you have, but the faster they get broken, the harder they are, the less grip you have, but the more resistant they are. Temperature influences their wear. Their size will as well play on grip, the wider they are the more contact with the ground will be significant.
  • The center of gravity: The higher your car is going to be, the more it will lean in the corners and consequently lose handling, that’s why low profile sports cars grip better than very high 4×4’s
  • Wheel Alignment: This adjustment allows you to control the vertical angle of your car’s wheels, it is consequently necessary for the grip of your motor vehicle and the wear of your tires. This adjustment is very particular and must be carried out by professionals.

.
There are many other elements to consider such as wheelbase, ground clearance, chassis rigidity, weight and aerodynamics…

Why is my Toyota Sequoia having problems with my car’s handling or grip?

We will now move on to the part that concerns you the most, why my Toyota Sequoia has handling problems? As we explained above, there are quite a lot of components to consider for your car to have a good grip, however there are few that can evolve over time, most of them are intrinsic to the construction of the vehicle, we will find out right away those that can disturb your handling and road, and, why:

  • As we explained above, the rubber of the tyres has a primordial function in the good road holding of your motor vehicle, if your tyres are dead, you may have problems of road holding on wet road at first and when you reach the “cord” even on dry road.
  • Dead shock absorbers: If your shock absorbers are dead, your motor vehicle will no longer be able to absorb the irregularities of the road properly and it will tend to “float”, which will result in a bad distribution of the masses on the car and shift the centre of gravity of the car. You risk slipping in the bends.
  • The risk with a misalignment is that your ground contact area is reduced because of a too open or too closed wheel angle, you will have grip problems.
  • A steering problem: Last but not least, the last necessary component for good road handling is that all the components of your steering must be in good condition. The most classic case is that your stabilizer bar or the silent blocks of your steering triangles are dead. The consequence will be a delay in your changes of direction.

How do you fix the handling problems?

We now move on to the different solutions to resolve your road holding problems on your Toyota Sequoia .

  • Tyres: Nothing could be easier, just replace your tyres, make sure to check them cautiously and replace them when you get to the visual indicator in the grooves of your tyres. It is generally required to count between 100 and 200 euros for a pair of tires.
  • Shock absorbers: Ditto, dead shock absorbers have to be changed, if you want to know when to change the shock absorbers of a Toyota Sequoia, please have a check out our content page on this topic. The price can vary quite a lot, but you will have to count at least 400€
  • Wheel alignment: You will have to go to your mechanic to have it solved, it will cost you less than 100€?
  • Steering: If you have problems with the handling on Toyota Sequoia because of your steering, there may be some components involved, in such a case you will have to produce a whole check-up of these components, the best is to call a specialist.

To discover more tips on the Toyota Sequoia, take a look at the Toyota Sequoia category.