In this article we are going to check out a problem that may prove to be unsafe. If you notice any handling or grip problems on your Chrysler Town & Country , it is necessary that you drive carefully and manage it fairly quickly. Our team has written this guideline to help you resolve them. First, we’ll fairly quickly check out the principal elements that assure effective road handling, then we’ll check out why your Chrysler Town & Country doesn’t hold the road any more, and at last we’ll check out how to resolve your grip complications.

problem-road-handling-chrysler-town-&-country

What are the main elements that assure great road holding and handling on a Chrysler Town & Country?

We begin this content by fairly quickly describing the main elements that will ensure good road holding for your Chrysler Town & Country. It’s necessary to know that a vehicle’s grip is a science in itself. It will therefore depend on many points, we will describe below the main ones that can be influenced:

  • Shock absorbers: The main elements of your road handling, they perpetually ensure the contact between the wheels and the road. They absorb all shocks and holes on the road.
  • Tyres: They are the ones that will ensure the grip of your Chrysler Town & Country on the road, the softer they are, the more grip you have, but the faster they get broken, the harder they are, the less grip you have, but the more resistant they are. Temperature affects their wear. Their size will also play on grip, the wider they are the more contact with the ground will be significant.
  • The center of gravity: The higher your car is going to be, the more it will lean in the corners and consequently lose handling, that’s why low profile sports vehicles grip better than very high 4×4’s
  • Wheel Alignment: This adjustment allows you to manage the vertical angle of your car’s wheels, it is consequently fundamental for the grip of your car and the wear of your tires. This adjustment is very precise and must be carried out by specialists.

.
There are many other elements to take into account such as wheelbase, ground clearance, chassis rigidity, weight and aerodynamics…

Why is my Chrysler Town & Country having complications with my car’s handling or grip?

We will now proceed to the component that interests you the most, why my Chrysler Town & Country has handling complications? As we outlined earlier, there are quite a lot of elements to take into account for your car to have a good grip, however there are few that can evolve with time, most of them are intrinsic to the construction of the vehicle, we will see right away those that can affect your handling and road, and, why:

  • As we mentioned earlier, the rubber of the tyres has a fundamental purpose in the good road holding of your car, if your tyres are dead, you may have complications of road holding on wet road at first and when you reach the “cord” even on dry road.
  • Dead shock absorbers: If your shock absorbers are dead, your car will no longer have the ability to absorb the irregularities of the road properly and it will tend to “float”, which will result in a bad distribution of the masses on the car and shift the centre of gravity of the car. You risk slipping in the bends.
  • The risk with a misalignment is that your ground contact area is reduced due to a too open or too closed wheel angle, you will have grip complications.
  • A steering problem: Last but not least, the last fundamental element for good road handling is that all the elements of your steering must be in good state. The most classic case is that your stabilizer bar or the silent blocks of your steering triangles are dead. The consequence will be a delay in your changes of way.

How do you resolve the handling complications?

We now proceed to the different solutions to correct your road holding complications on your Chrysler Town & Country .

  • Tyres: Nothing could be simpler, just change your tyres, make sure to check them carefully and change them when you get to the visual indicator in the grooves of your tyres. It is generally necessary to count between 100 and 200 euros for a pair of tires.
  • Shock absorbers: Ditto, dead shock absorbers have to be changed, if you want to know when to change the shock absorbers of a Chrysler Town & Country, please have a check out our content on this theme. The price can vary quite a lot, but you will have to count at least 400€
  • Wheel alignment: You will have to go to your garage to have it corrected, it will cost you less than 100€?
  • Steering: If you have complications with the handling on Chrysler Town & Country due to your steering, there may be several elements concerned, in such a case you will have to produce a complete check-up of these elements, the best is to call a professional.

If you want more guides on the Chrysler Town & Country, go to our Chrysler Town & Country category.