Today we are going to check out a issue that may prove to be dangerous. If you notice any handling or grip problems on your Chrysler 300 , it is important that you drive attentively and take care of it quickly. Our team has posted this article content to help you resolve them. First, we’ll quickly look at the main components that ensure effective road handling, then we’ll look at why your Chrysler 300 doesn’t hold the road any more, and finally we’ll look at how to resolve your grip problems.

problem-road-handling-chrysler-300

What are the main elements that ensure great road holding and handling on a Chrysler 300?

We commence this article by quickly telling you the main components that will ensure good road holding for your Chrysler 300. It’s important to know that a vehicle’s grip is a science in itself. It will as a result depend on many factors, we will describe below the main ones that can be influenced:

  • Shock absorbers: The main components of your road handling, they perpetually ensure the contact between the wheels and the road. They absorb all shocks and holes on the road.
  • Tyres: They are the ones that will ensure the grip of your Chrysler 300 on the road, the softer they are, the more grip you have, but the faster they get broken, the harder they are, the less grip you have, but the more resistant they are. Temperature influences their wear. Their size will as well play on grip, the wider they are the more contact with the ground will be important.
  • The center of gravity: The higher your car is going to be, the more it will lean in the corners and therefore lose handling, that’s why low profile sports vehicles grip better than very high 4×4’s
  • Wheel Alignment: This adjustment allows you to control the vertical angle of your car’s wheels, it is therefore important for the grip of your car and the wear of your tires. This adjustment is very particular and must be done by specialists.

.
There are many other components to consider such as wheelbase, ground clearance, chassis rigidity, weight and aerodynamics…

Why is my Chrysler 300 having problems with my car’s handling or grip?

We will now move on to the part that concerns you the most, why my Chrysler 300 has handling problems? As we described earlier, there are a lot of elements to consider for your car to have a good grip, nevertheless there are few that can evolve over time, most of them are intrinsic to the construction of the automobile, we will see right away those that can bother your handling and road, and, why:

  • As we revealed earlier, the rubber of the tyres has a crucial purpose in the good road holding of your car, if your tyres are dead, you might have problems of road holding on wet road at first and when you reach the “cord” even on dry road.
  • Dead shock absorbers: If your shock absorbers are dead, your car will no longer be able to absorb the irregularities of the road effectively and it will often “float”, which will end result in a bad distribution of the masses on the vehicle and shift the centre of gravity of the vehicle. You risk slipping in the bends.
  • The risk with a misalignment is that your ground contact area is reduced because of a too open or too closed wheel angle, you will have grip problems.
  • A steering issue: Last but not least, the last important part for good road handling is that all the elements of your steering must be in good condition. The most classic circumstance is that your stabilizer bar or the silent blocks of your steering triangles are dead. The outcome will be a delay in your changes of direction.

How do you resolve the handling problems?

We now move on to the different solutions to resolve your road holding problems on your Chrysler 300 .

  • Tyres: Nothing could be less complicated, just replace your tyres, make sure to check them attentively and replace them when you get to the visual indicator in the grooves of your tyres. It is generally necessary to count between 100 and 200 euros for a pair of tires.
  • Shock absorbers: Ditto, dead shock absorbers have to be changed, if you want to know when to change the shock absorbers of a Chrysler 300, please have a look at our article on this topic. The price can vary a lot, but you will have to count at least 400€
  • Wheel alignment: You will have to go to your garage area to have it solved, it will cost you less than 100€?
  • Steering: If you have problems with the handling on Chrysler 300 because of your steering, there might be several elements involved, in this case you will have to make a complete check-up of these elements, the best is to call a professional.

Whenever you have any further questions about the Chrysler 300, do not hesitate to consult our Chrysler 300 category.