In this article we are going to examine a problem that may prove to be threatening. If you identify any handling or grip problems on your Acura TSX , it is essential that you drive cautiously and handle it fairly quickly. Our team has written and published this content to help you resolve them. First, we’ll fairly quickly look at the main parts that ensure effective road handling, then we’ll look at why your Acura TSX doesn’t hold the road any more, and finally we’ll look at how to resolve your grip complications.

problem-road-handling-acura-tsx

What are the main components that ensure great road holding and handling on a Acura TSX?

We begin this content page by fairly quickly describing the main parts that will ensure good road holding for your Acura TSX. It’s essential to know that a vehicle’s grip is a science in itself. It will as a result be based upon many factors, we will describe below the main ones that can be influenced:

  • Shock absorbers: The main parts of your road handling, they permanently ensure the contact between the wheels and the road. They absorb all shocks and holes on the road.
  • Tyres: They are the ones that will ensure the grip of your Acura TSX on the road, the softer they are, the more grip you have, but the faster they get damaged, the harder they are, the less grip you have, but the more resistant they are. Temperature influences their wear. Their size will also play on grip, the wider they are the more contact with the ground will be significant.
  • The center of gravity: The higher your car is going to be, the more it will lean in the corners and therefore lose handling, that’s why low profile sports vehicles grip better than very high 4×4’s
  • Wheel Alignment: This adjustment allows you to control the vertical angle of your car’s wheels, it is therefore important for the grip of your car and the wear of your tires. This adjustment is very particular and must be carried out by professionals.

.
There are many other parts to take into consideration such as wheelbase, ground clearance, chassis rigidity, weight and aerodynamics…

Why is my Acura TSX having complications with my car’s handling or grip?

We will now proceed to the component that concerns you the most, why my Acura TSX has handling complications? As we mentioned above, there are a lot of components to take into consideration for your car to have a good grip, nevertheless there are few that can evolve over time, most of them are intrinsic to the construction of the vehicle, we will see right away those that can bother your handling and road, and, why:

  • As we described above, the rubber of the tyres has a crucial purpose in the good road holding of your car, if your tyres are dead, you might have complications of road holding on wet road at first and when you reach the “cord” even on dry road.
  • Dead shock absorbers: If your shock absorbers are dead, your car will no longer be able to absorb the irregularities of the road properly and it will often “float”, which will end result in a bad distribution of the masses on the vehicle and shift the centre of gravity of the vehicle. You risk slipping in the bends.
  • The risk with a misalignment is that your ground contact area is reduced due to a too open or too closed wheel angle, you will have grip complications.
  • A steering problem: Last but not least, the last important component for good road handling is that all the components of your steering must be in good state. The most traditional case is that your stabilizer bar or the silent blocks of your steering triangles are dead. The result will be a delay in your changes of direction.

How do you resolve the handling complications?

We now proceed to the different solutions to correct your road holding complications on your Acura TSX .

  • Tyres: Nothing could be less complicated, just change your tyres, remember to verify them cautiously and change them when you get to the visual indicator in the grooves of your tyres. It is generally required to count between 100 and 200 euros for a pair of tires.
  • Shock absorbers: Ditto, dead shock absorbers have to be changed, if you want to know when to change the shock absorbers of a Acura TSX, please have a look at our content page on this theme. The price can vary a lot, but you will have to count at least 400€
  • Wheel alignment: You will have to go to your mechanic to have it fixed, it will cost you less than 100€?
  • Steering: If you have complications with the handling on Acura TSX due to your steering, there may be several components concerned, in this case you will have to produce a whole check-up of these components, the best is to call a specialist.

If you want more tutorials on the Acura TSX, go to our Acura TSX category.