Learning to drive a car is not constantly unproblematic, and sometimes it may seem like a good solution to select an automatic Fiat Panda 3, if it’s for basic comfort or ease of use, this sort of transmission is becoming more and more known. Nevertheless, although they may seem like an excellent choice, there might also be problems with the automatic gearboxes of your Fiat Panda 3 . This is exactly the topic of our article. First, we’ll briefly describe the different types of automatic gearboxes, then, in a second step, which problems you might face with the gearbox of your Fiat Panda 3 , and, at last, how to fix them.

problem-automatic-transmission-fiat-panda-3

The different kind of automatic gearbox of a Fiat Panda 3

.
Gearboxes have the advantage of being reputed to be trustworthy, as you don’t need to use your clutch pedal and every thing is electronically and mechanically controlled there will be no early wear of your clutch or other elements that could be put to the test by misuse on your component.
Nevertheless, based on the sort of automatic transmission your Fiat Panda 3 is equipped with you will have more or less reliability, we will expose them to you now:

  • Common automatic gearbox: It will use a torque converter, which will manage the gear changes, it’s the oldest technology, it has evolved a lot in the last decades (more gears and a better management of the gear changes).
  • Robotized automatic gearbox: This is a manual gearbox with a robotized system that will replace the driver’s action. This sort of gearbox is less and less general because they are considered very slow. We also generally feel a coupling during deceleration.
  • Dual-clutch automatic transmission: This is the ultimate automatic transmission, it functions on the same concept as the robotic transmission, but thanks to its dual clutch, you won’t have any more problems with slow speeds or increased fuel consumption. They are often equipped on luxury models.
  • Continuously variable automatic box: It is the same concept as on a scooter, a variator will come to control the differences between acceleration and motor speed, they are really slow and tend to be unresponsive during the acceleration phases of your Fiat Panda 3.

.

I’m having problems with the automatic transmission on my Fiat Panda 3

We now start the component that surely attracts you the most in this post, what are the problems you may face with the automatic transmission of your Fiat Panda 3? As revealed above, in general they are more reliable than manual transmissions, however, here are the most important problems you may face:

  • As described over, no matter what sort of automatic gearbox, they are generally known to be slow and have inertia when accelerating. Nevertheless, this phenomenon is supposed to happen only when the car is started, not when it is launched. If it feels like it occurs constantly, the clutch or converter is most likely dead.
  • I have the feeling that a gear in the automatic transmission of my Fiat Panda 3 no longer shifts or jumps: If you have the feeling that your gears no longer shift or tend to jump on your Fiat Panda 3, there is a component that is most likely to blame for this failure. In truth, the solenoid that acts as a “switch” to engage the gears must not be working effectively, second option, a speed or engine unit speed sensor may be defective and send the wrong information to your gearbox.
  • If you experience drops coming from the automatic gearbox of your Fiat Panda 3: If you experience a clutch when you go up or when you slow down, it is either your oil which is too old and which does not lubricate any more adequately all the mechanisms of your gearbox, or else a sensor which gives bad info

    • .

  • My Fiat Panda 3’s automatic transmission is leaking: At last, if your Fiat Panda 3’s automatic transmission is leaking, it’s most likely one of your spy seals is too worn.

How do I fix automatic transmission problems on a Fiat Panda 3?

And finally, we’re going to try to give you the techniques to resolve the automatic transmission problems on your Fiat Panda 3 . Find them just below:

  • Oil leak on the automatic gearbox of a Fiat Panda 3: Find the source of the leak, and replace the concerned gasket, get it done by a professional, opening a gearbox is not easy. It will cost you a few hundred euros, specifically for the labour. Do not hesitate to read our article on gearbox oil leaks on Fiat Panda 3.
  • Sensor issue: No matter which sensor is involved, a replacement is the only remedy, sensors do not repair themselves, you should count from 100 to a few hundred euros depending on the difficulty of access to the one that concerns you.
  • Couplings: If you have problems with the couplings on your Fiat Panda 3, you will only need to do a complete gearbox change to gain comfort and preserve your gears.
  • The automatic gearbox of my Fiat Panda 3 slips: In this instance, you clearly have a dead clutch disc, you will have to change the clutch, and on some models you won’t have the ability to change it without doing a standard exchange of the gearbox, be prepared to spend more than a thousand euros.

There are other automatic transmission problems on Fiat Panda 3, such as electronic problems or pressure problems, but this list lists the most important ones, in any case, for such complex mechanisms. Once you feel a problem on this level, we recommend you to go fairly quickly to your mechanic.

Whenever you have any additional questions about the Fiat Panda 3, do not hesitate to consult our Fiat Panda 3 category.