Driving a vehicle is a daily activity for many of us, our paths are not necessarily secure, and no matter it’s raining, windy or snowing, we frequently have no choice but to take our Toyota Rav 4. Not being able to act on traffic conditions, we try to have at minimum a safe car! If you are not secure, if you have the feeling that your Toyota Rav 4 is pulling to the left, then you are on the good website. All of us chose to publish this article to help you find the source of this problem and quickly feel safe behind the wheel of your car. To make this happen, we will first take a look at the causes of a Toyota Rav 4 that pulls to the left without vibration and finally, a car that pulls to the left with vibration.
Toyota Rav 4 that pulls to the left without vibration
Toyota Rav 4 pulling to the left because of the alignment
Let’s commence with the circumstance of your Toyota Rav 4 which pulls to the left without vibration, one of the most common roots of a non-straight trajectory on a car is the alignment , the truth is, the parallelism is the adjustment of the vertical angle of the wheels, this adjustment is usually carried out when you swap your tires. Although it is difficult or even impossible to know the state of your alignment, you can check out the sidewalls of your tires, if you detect abnormal wear on your Toyota Rav 4, it is certain that the alignment is at fault. In this instance, go to your garage area or tyre specialist to resolve it.
Toyota Rav 4 pulling to the left because of the tyres
Speaking of tires, parallelism isn’t the only trigger for a car that pulls to the left. In fact, if you have a difference in pressure on your tires, it is rational that your Toyota Rav 4 is no longer a stable steering. Therefore make sure to check the pressure of all four tyres. In addition to the risk of an injury if you feel your Toyota Rav 4 pulling to the left because of the tyre pressure, you will accelerate the wear of the tyres. And as a consequence, you will have to swap them faster.
My Toyota Rav 4 is pulling to the left and I feel vibrations:
Toyota Rav 4 pulling to the left because of the silent blocks
Now let’s look at the case of a Toyota Rav 4 that pulls to the left but also causes vibrations in the steering wheel. The first common cause of trajectory error plus vibration is that your silent blocks are dead. In fact, when they are too worn, they will no longer assume their function of shock absorber and binder between the different parts of your front drivetrain, which ends up in a lack of stability in the steering and the possibility if they are more worn on one side than the other that your Toyota Rav 4 pulls to the left. Check their state and swap them if required. In the event that you want more information on trouble with the silent blocks, please read our specific article.
My Toyota Rav 4 pulls to the left because of the bearings
Another possibility that your Toyota Rav 4 pulls to the left is that one of your bearings, generally the front one, is dead, you should, moreover to the trajectory defect, experience a particular vibration or rolling noise. In fact, when bearings are damaged, they no longer rotate as well and slow down the rotation of the wheel on which they are installed, which inevitably ends up in a trajectory defect. Check their state and have them swapped out if necessary.
My Toyota Rav 4 pulls to the left because of the shock absorbers
Last but not least, your Toyota Rav 4 that pulls to the left and makes vibrations because of the shock absorbers. Regardless it’s the damper cup, your tired springs, or a twisted cylinder, every defect in connection with the shock absorbers can affect the natural behaviour of the Toyota Rav 4. You should, even so, feel a noise when you drive over bumps or on speed bumps, for example. Have the state of your shock absorbers checked and ask your repair shop for a replacement if necessary.
To discover more tips on the Toyota Rav 4, take a look at the Toyota Rav 4 category.
