Driving is a daily activity for most of us, our paths are not all the time safe, and it doesn’t matter if it’s raining, windy or snowing, we quite often have no choice but to take our Seat Ateca. Not having the ability to act on traffic conditions, we try to have at minimum a safe vehicle! If you are not at ease, if you have the feeling that your Seat Ateca is pulling to the left, then you are in the right place. Our team chose to compose this article content to help you locate the origin of this issue and fairly quickly feel safe behind the wheel of your car. To achieve this, we will first look into the causes of a Seat Ateca that pulls to the left without vibration and to finish, a car that pulls to the left with vibration.
Seat Ateca that pulls to the left without vibration
Seat Ateca pulling to the left because of the alignment
Let’s begin with the circumstance of your Seat Ateca which pulls to the left without vibration, one of the most traditional sources of a non-straight trajectory on a vehicle is the alignment , in reality, the parallelism is the adjustment of the vertical angle of the wheels, this adjustment is usually done when you replace your tires. Nevertheless it is tricky or even impossible to know the state of your alignment, you can examine the sidewalls of your tires, if you see abnormal wear on your Seat Ateca, it is likely that the alignment is at fault. In this instance, go to your garage area or tyre professional to correct it.
Seat Ateca pulling to the left because of the tyres
Speaking of tires, parallelism isn’t the only reason for a car that pulls to the left. Actually, if you have a difference in pressure on your tires, it is logical that your Seat Ateca is no longer a stable steering. Therefore don’t forget to check the pressure of all four tyres. Moreover to the risk of an ıncident if you feel your Seat Ateca pulling to the left because of the tyre pressure, you will accelerate the wear of the tyres. And consequently, you will have to replace them faster.
My Seat Ateca is pulling to the left and I feel vibrations:
Seat Ateca pulling to the left because of the silent blocks
Now let’s look at the case of a Seat Ateca that pulls to the left but also causes vibrations in the steering wheel. The first common reason of trajectory error plus vibration is that your silent blocks are dead. Actually, when they are too damaged, they no longer handle their job of shock absorber and binder between the different elements of your front drivetrain, which creates a lack of stability in the steering and the possibility if they are more worn on one side than the other that your Seat Ateca pulls to the left. Verify their state and replace them if needed. If you want more info on problems with the silent blocks, please examine our detailed article content.
My Seat Ateca pulls to the left because of the bearings
Another possibility that your Seat Ateca pulls to the left is that one of your bearings, commonly the front one, is dead, you should, furthermore to the trajectory defect, experience a singular vibration or rolling noise. Actually, when bearings are damaged, they will no longer rotate as well and slow down the rotation of the wheel on which they are installed, which consequentially creates a trajectory defect. Verify their state and have them replaced if needed.
My Seat Ateca pulls to the left because of the shock absorbers
Last but not least, your Seat Ateca that pulls to the left and creates vibrations because of the shock absorbers. Regardless it’s the damper cup, your tired springs, or a twisted cylinder, every defect related to the shock absorbers can disturb the normal behaviour of the Seat Ateca. You should, nevertheless, feel a noise when you drive over bumps or on speed bumps, for example. Have the state of your shock absorbers checked and ask your repair shop for a replacement if needed.
If you need more tutorials on the Seat Ateca, go to our Seat Ateca category.
