Driving a car is a daily activity for a lot of people, our roads are not necessarily secure, and no matter it’s raining, windy or snowing, we often have no choice but to take our Renault Clio 3. Not having the capability to act on traffic conditions, we try to have at minimum a safe vehicle! If you are not secure, if you have the impression that your Renault Clio 3 is pulling to the left, then you are on the good website. We decided to write this article content to help you uncover the origin of this problem and fairly quickly feel safe behind the wheel of your car. To do this, we will first look at the triggers of a Renault Clio 3 that pulls to the left without vibration and to finish, a car that pulls to the left with vibration.
Renault Clio 3 that pulls to the left without vibration
Renault Clio 3 pulling to the left because of the alignment
Let’s start with the circumstance of your Renault Clio 3 which pulls to the left without vibration, one of the most typical sources of a non-straight trajectory on a vehicle is the alignment , actually, the parallelism is the adjustment of the vertical angle of the wheels, this adjustment is mostly achieved when you replace your tires. Despite the fact it is hard or even impossible to know the state of your alignment, you can look at the sidewalls of your tires, if you identify abnormal wear on your Renault Clio 3, it is most likely that the alignment is at fault. In this instance, go to your service garage or tyre specialist to solve it.
Renault Clio 3 pulling to the left because of the tyres
Speaking of tires, parallelism isn’t the only cause for a car that pulls to the left. In truth, if you have a difference in pressure on your tires, it is rational that your Renault Clio 3 is no longer a stable steering. Therefore remember to check the pressure of all four tyres. Additionally to the risk of an ıncident if you experience your Renault Clio 3 pulling to the left because of the tyre pressure, you will accelerate the wear of the tyres. And therefore, you will have to replace them more quickly.
My Renault Clio 3 is pulling to the left and I experience vibrations:
Renault Clio 3 pulling to the left because of the silent blocks
Now let’s look at the case of a Renault Clio 3 that pulls to the left but also triggers vibrations in the steering wheel. The first common justification of trajectory error plus vibration is that your silent blocks are dead. In truth, when they are too worn, they will no longer handle their function of shock absorber and binder between the different elements of your front drivetrain, which leads to a lack of stability in the steering and the possibility if they are more worn on one side than the other that your Renault Clio 3 pulls to the left. Verify their state and replace them if needed. If you would like more info on trouble with the silent blocks, please examine our specific article content.
My Renault Clio 3 pulls to the left due to the bearings
Another possibility that your Renault Clio 3 pulls to the left is that one of your bearings, in most cases the front one, is dead, you should, in addition to the trajectory deficiency, feel a notable vibration or rolling noise. In truth, when bearings are damaged, they will no longer rotate as well and slow down the rotation of the wheel on which they are installed, which certainly leads to a trajectory deficiency. Verify their state and have them swapped out if needed.
My Renault Clio 3 pulls to the left due to the shock absorbers
Last but not least, your Renault Clio 3 that pulls to the left and makes vibrations due to the shock absorbers. Regardless whether it’s the damper cup, your tired springs, or a twisted cylinder, every deficiency in connection with the shock absorbers can affect the usual behaviour of the Renault Clio 3. You should, however, undergo a noise when you drive over bumps or on speed bumps, for example. Have the state of your shock absorbers checked out and ask your mechanic for a replacement if needed.
To get more tips on the Renault Clio 3, take a look at the Renault Clio 3 category.
