Driving a vehicle is a daily activity for many people, our roads are not all the time secure, and regardless whether it’s raining, windy or snowing, we frequently have no choice but to take our Peugeot 1007. Not having the ability to act on traffic conditions, we try to have at minimum a safe vehicle! If you are not secure, if you have the impression that your Peugeot 1007 is pulling to the left, then you are in the good. All of us made the decision to write this article content to help you discover the cause of this trouble and quickly feel safe behind the wheel of your car. To make this happen, we will first look at the causes of a Peugeot 1007 that pulls to the left without vibration and to conclude, a car that pulls to the left with vibration.

pull-leftpeugeot-1007

Peugeot 1007 that pulls to the left without vibration

Peugeot 1007 pulling to the left because of the alignment

Let’s start with the case of your Peugeot 1007 which pulls to the left without vibration, one of the most common sources of a non-straight trajectory on a vehicle is the alignment , in reality, the parallelism is the adjustment of the vertical angle of the wheels, this adjustment is usually achieved when you replace your tires. Although it is hard or even impossible to know the condition of your alignment, you can look at the sidewalls of your tires, if you identify abnormal wear on your Peugeot 1007, it is certain that the alignment is at fault. In this case, go to your mechanic or tyre expert to solve it.

Peugeot 1007 pulling to the left because of the tyres

Speaking of tires, parallelism isn’t the only motive for a car that pulls to the left. In fact, if you have a difference in pressure on your tires, it is logical that your Peugeot 1007 is no longer a stable steering. So be sure you examine the pressure of all four tyres. Additionally to the risk of an ıncident if you feel your Peugeot 1007 pulling to the left because of the tyre pressure, you will accelerate the wear of the tyres. And consequently, you will have to replace them quicker.

My Peugeot 1007 is pulling to the left and I feel vibrations:

Peugeot 1007 pulling to the left because of the silent blocks

Now let’s look at the case of a Peugeot 1007 that pulls to the left but also causes vibrations in the steering wheel. The first regular reason of trajectory error plus vibration is that your silent blocks are dead. In fact, when they are too damaged, they will no longer manage their job of shock absorber and binder between the different units of your front drivetrain, which creates a lack of stability in the steering and the possibility if they are more worn on one side than the other that your Peugeot 1007 pulls to the left. Check their condition and replace them if required. If you really want more information on concerns with the silent blocks, please examine our particular article content.

My Peugeot 1007 pulls to the left because of the bearings

Another possibility that your Peugeot 1007 pulls to the left is that one of your bearings, usually the front one, is dead, you should, furthermore to the trajectory defect, feel a notable vibration or rolling noise. In fact, when bearings are damaged, they no more rotate as well and slow down the rotation of the wheel on which they are installed, which certainly creates a trajectory defect. Check their condition and have them swapped out if needed.

My Peugeot 1007 pulls to the left because of the shock absorbers

Last but not least, your Peugeot 1007 that pulls to the left and generates vibrations because of the shock absorbers. Regardless it’s the damper cup, your tired springs, or a twisted cylinder, every defect relevant to the shock absorbers can affect the common behaviour of the Peugeot 1007. You should, nevertheless, undergo a noise when you drive over bumps or on speed bumps, for example. Have the condition of your shock absorbers checked out and ask your auto mechanic for a replacement if needed.

If perhaps you have any further questions about the Peugeot 1007, do not hesitate to consult our Peugeot 1007 category.