Driving is a daily activity for many of us, our paths are not always safe, and whether it’s raining, windy or snowing, we quite often have no choice but to take our Nissan Cube. Not having the ability to act on traffic conditions, we try to have at least a safe automobile! If you are not at ease, if you have the feeling that your Nissan Cube is pulling to the left, then you are in the good. All of us decided to prepare this content page to help you uncover the origin of this issue and as soon as possible feel safe behind the wheel of your car. To get this done, we will first check out the causes of a Nissan Cube that pulls to the left without vibration and to conclude, a car that pulls to the left with vibration.
Nissan Cube that pulls to the left without vibration
Nissan Cube pulling to the left because of the alignment
Let’s start with the case of your Nissan Cube which pulls to the left without vibration, one of the most common origins of a non-straight trajectory on a automobile is the alignment , the reality is, the parallelism is the adjustment of the vertical angle of the wheels, this adjustment is usually done when you change your tires. Despite the fact it is hard or even impossible to know the state of your alignment, you can take a look at the sidewalls of your tires, if you identify abnormal wear on your Nissan Cube, it is likely that the alignment is at fault. In cases like this, go to your service garage or tyre professional to correct it.
Nissan Cube pulling to the left because of the tyres
Speaking of tires, parallelism isn’t the only explanation for a car that pulls to the left. In actual fact, if you have a difference in pressure on your tires, it is obvious that your Nissan Cube is no longer a stable steering. Therefore don’t forget to examine the pressure of all four tyres. Furthermore to the risk of an injury if you experience your Nissan Cube pulling to the left because of the tyre pressure, you will accelerate the wear of the tyres. And as a consequence, you will have to change them quicker.
My Nissan Cube is pulling to the left and I experience vibrations:
Nissan Cube pulling to the left because of the silent blocks
Now let’s look at the case of a Nissan Cube that pulls to the left but also causes vibrations in the steering wheel. The first known cause of trajectory error plus vibration is that your silent blocks are dead. In actual fact, when they are too damaged, they not anymore assume their task of shock absorber and binder between the different parts of your front drivetrain, which ends up in a lack of stability in the steering and the possibility if they are more worn on one side than the other that your Nissan Cube pulls to the left. Examine their state and change them if needed. In the event that you would like more info on problems with the silent blocks, please go through our detailed content page.
My Nissan Cube pulls to the left due to the bearings
Another possibility that your Nissan Cube pulls to the left is that one of your bearings, commonly the front one, is dead, you should, additionally to the trajectory problem, feel a particular vibration or rolling noise. In actual fact, when bearings are damaged, they not anymore rotate as well and slow down the rotation of the wheel on which they are installed, which inevitably ends up in a trajectory problem. Examine their state and have them replaced if necessary.
My Nissan Cube pulls to the left due to the shock absorbers
Last but not least, your Nissan Cube that pulls to the left and makes vibrations due to the shock absorbers. It doesn’t matter if it’s the damper cup, your tired springs, or a twisted cylinder, every problem associated with the shock absorbers can disrupt the usual behaviour of the Nissan Cube. You should, however, feel a noise when you drive over bumps or on speed bumps, for example. Have the state of your shock absorbers examined and ask your auto mechanic for a replacement if necessary.
To get more tips on the Nissan Cube, take a look at the Nissan Cube category.
