Driving a car is a daily activity for many of us, our tracks are not always safe, and regardless whether it’s raining, windy or snowing, we quite often have no choice but to take our Mazda CX 7. Not having the capability to act on traffic conditions, we try to have at minimum a safe car! If you are not at ease, if you have the feeling that your Mazda CX 7 is pulling to the left, then you are in the good. All of us chose to write this article to help you locate the source of this issue and as soon as possible feel safe behind the wheel of your car. To make this happen, we will first look at the triggers of a Mazda CX 7 that pulls to the left without vibration and to finish, a car that pulls to the left with vibration.

pull-leftmazda-cx-7

Mazda CX 7 that pulls to the left without vibration

Mazda CX 7 pulling to the left because of the alignment

Let’s begin with the circumstance of your Mazda CX 7 which pulls to the left without vibration, one of the most basic roots of a non-straight trajectory on a car is the alignment , the reality is, the parallelism is the adjustment of the vertical angle of the wheels, this adjustment is usually done when you swap your tires. Even though it is difficult or even impossible to know the condition of your alignment, you can examine the sidewalls of your tires, if you find abnormal wear on your Mazda CX 7, it is likely that the alignment is to blame. In cases like this, go to your garage area or tyre expert to correct it.

Mazda CX 7 pulling to the left because of the tyres

Speaking of tires, parallelism isn’t the only reason for a car that pulls to the left. In reality, if you have a difference in pressure on your tires, it is obvious that your Mazda CX 7 is no longer a stable steering. So make sure to verify the pressure of all four tyres. Additionally to the risk of an ıncident if you feel your Mazda CX 7 pulling to the left because of the tyre pressure, you will accelerate the wear of the tyres. And consequently, you will have to swap them quicker.

My Mazda CX 7 is pulling to the left and I feel vibrations:

Mazda CX 7 pulling to the left because of the silent blocks

Now let’s look at the case of a Mazda CX 7 that pulls to the left but also triggers vibrations in the steering wheel. The first regular reason of trajectory error plus vibration is that your silent blocks are dead. In reality, when they are too worn, they not anymore handle their duty of shock absorber and binder between the different auto parts of your front drivetrain, which brings about a lack of stability in the steering and the possibility if they are more worn on one side than the other that your Mazda CX 7 pulls to the left. Check their condition and swap them if necessary. If you would like more information on concerns with the silent blocks, please read our specific article.

My Mazda CX 7 pulls to the left because of the bearings

Another possibility that your Mazda CX 7 pulls to the left is that one of your bearings, in most cases the front one, is dead, you should, in addition to the trajectory defect, feel a singular vibration or rolling noise. In reality, when bearings are damaged, they no longer rotate as well and slow down the rotation of the wheel on which they are installed, which consequentially brings about a trajectory defect. Check their condition and have them swapped out if necessary.

My Mazda CX 7 pulls to the left because of the shock absorbers

Last but not least, your Mazda CX 7 that pulls to the left and generates vibrations because of the shock absorbers. Whether it’s the damper cup, your tired springs, or a twisted cylinder, every defect associated with the shock absorbers can bother the normal behaviour of the Mazda CX 7. You should, even so, encounter a noise when you drive over bumps or on speed bumps, for example. Have the condition of your shock absorbers inspected and ask your auto mechanic for a replacement if necessary.

Whenever you have any additional questions about the Mazda CX 7, do not hesitate to consult our Mazda CX 7 category.