Driving is a daily activity for a lot of people, our paths are not all the time secure, and regardless it’s raining, windy or snowing, we quite often have no choice but to take our Mazda CX 5. Not having the ability to act on traffic conditions, we try to have at minimum a safe car! If you are not at ease, if you have the feeling that your Mazda CX 5 is pulling to the left, then you are on the good page. We chose to publish this article to help you discover the source of this problem and quickly feel safe behind the wheel of your car. To do this, we will initially look at the triggers of a Mazda CX 5 that pulls to the left without vibration and finally, a car that pulls to the left with vibration.
Mazda CX 5 that pulls to the left without vibration
Mazda CX 5 pulling to the left because of the alignment
Let’s start with the case of your Mazda CX 5 which pulls to the left without vibration, one of the most basic sources of a non-straight trajectory on a car is the alignment , the truth is, the parallelism is the adjustment of the vertical angle of the wheels, this adjustment is usually conducted when you replace your tires. Even though it is difficult or even impossible to know the state of your alignment, you can look at the sidewalls of your tires, if you identify abnormal wear on your Mazda CX 5, it is certain that the alignment is to blame. In this instance, go to your garage or tyre specialist to solve it.
Mazda CX 5 pulling to the left because of the tyres
Speaking of tires, parallelism isn’t the only cause for a car that pulls to the left. In fact, if you have a difference in pressure on your tires, it is logical that your Mazda CX 5 is no longer a stable steering. So don’t forget to check the pressure of all four tyres. In addition to the risk of an injury if you feel your Mazda CX 5 pulling to the left because of the tyre pressure, you will accelerate the wear of the tyres. And as a result, you will have to replace them faster.
My Mazda CX 5 is pulling to the left and I feel vibrations:
Mazda CX 5 pulling to the left because of the silent blocks
Now let’s look at the case of a Mazda CX 5 that pulls to the left but also triggers vibrations in the steering wheel. The first known trigger of trajectory error plus vibration is that your silent blocks are dead. In fact, when they are too damaged, they not anymore handle their role of shock absorber and binder between the different units of your front drivetrain, which brings about a lack of stability in the steering and the possibility if they are more worn on one side than the other that your Mazda CX 5 pulls to the left. Verify their state and replace them if necessary. In the event that you really want more information on problems with the silent blocks, please read our specific article.
My Mazda CX 5 pulls to the left because of the bearings
Another possibility that your Mazda CX 5 pulls to the left is that one of your bearings, usually the front one, is dead, you should, furthermore to the trajectory deficiency, undergo a singular vibration or rolling noise. In fact, when bearings are damaged, they no longer rotate as well and slow down the rotation of the wheel on which they are installed, which inevitably brings about a trajectory deficiency. Verify their state and have them swapped out if necessary.
My Mazda CX 5 pulls to the left because of the shock absorbers
Last but not least, your Mazda CX 5 that pulls to the left and generates vibrations because of the shock absorbers. It doesn’t matter if it’s the damper cup, your tired springs, or a twisted cylinder, every deficiency relevant to the shock absorbers can bother the normal behaviour of the Mazda CX 5. You should, nevertheless, undergo a noise when you drive over bumps or on speed bumps, for example. Have the state of your shock absorbers checked and ask your auto technician for a replacement if necessary.
If perhaps you have any additional questions about the Mazda CX 5, do not hesitate to consult our Mazda CX 5 category.
