Driving a car is a daily activity for the majority of us, our paths are not necessarily safe, and whether it’s raining, windy or snowing, we often have no choice but to take our Mazda 5. Not being able to act on traffic conditions, we try to have at minimum a safe vehicle! If you are not confident, if you have the feeling that your Mazda 5 is pulling to the right, then you are in the right place. Our team decided to write this article content to help you find the source of this issue and fairly quickly feel safe behind the wheel of your car. To accomplish this, we will first look into the triggers of a Mazda 5 that pulls to the right without vibration and finally, a car that pulls to the right with vibration.

pull-rightmazda-5

Mazda 5 that pulls to the right without vibration

Mazda 5 pulling to the right because of the alignment

Let’s start with the circumstance of your Mazda 5 which pulls to the right without vibration, one of the most traditional origins of a non-straight trajectory on a vehicle is the alignment , in reality, the parallelism is the adjustment of the vertical angle of the wheels, this adjustment is normally conducted when you change your tires. Although it is hard or even impossible to know the state of your alignment, you can check out the sidewalls of your tires, if you identify abnormal wear on your Mazda 5, it is certain that the alignment is to blame. In this instance, go to your service garage or tyre specialist to resolve it.

Mazda 5 pulling to the right because of the tyres

Speaking of tires, parallelism isn’t the only motive for a car that pulls to the right. In fact, if you have a difference in pressure on your tires, it is obvious that your Mazda 5 is no longer a stable steering. So make sure to verify the pressure of all four tyres. Additionally to the risk of an ıncident if you encounter your Mazda 5 pulling to the left because of the tyre pressure, you will accelerate the wear of the tyres. And as a consequence, you will have to change them more quickly.

My Mazda 5 is pulling to the right and I encounter vibrations:

Mazda 5 pulling to the right because of the silent blocks

Now let’s look at the case of a Mazda 5 that pulls to the right but also triggers vibrations in the steering wheel. The first regular trigger of trajectory error plus vibration is that your silent blocks are dead. In fact, when they are too worn, they not anymore assume their duty of shock absorber and binder between the different units of your front drivetrain, which can cause a lack of stability in the steering and the possibility if they are more worn on one side than the other that your Mazda 5 pulls to the right. Examine their state and change them if needed. In the event that you want more info on concerns with the silent blocks, please examine our detailed article content.

My Mazda 5 pulls to the right because of the bearings

Another possibility that your Mazda 5 pulls to the right is that one of your bearings, commonly the front one, is dead, you should, furthermore to the trajectory problem, undergo a particular vibration or rolling noise. In fact, when bearings are damaged, they not anymore rotate as well and slow down the rotation of the wheel on which they are installed, which consequentially can cause a trajectory problem. Examine their state and have them replaced if necessary.

My Mazda 5 pulls to the right because of the shock absorbers

Last but not least, your Mazda 5 that pulls to the right and generates vibrations because of the shock absorbers. It doesn’t matter if it’s the damper cup, your tired springs, or a twisted cylinder, every problem related to the shock absorbers can disturb the common behaviour of the Mazda 5. You should, even so, experience a noise when you drive over bumps or on speed bumps, for example. Have the state of your shock absorbers checked out and ask your auto mechanic for a replacement if necessary.

To discover more tips on the Mazda 5, take a look at the Mazda 5 category.