Driving a vehicle is a daily activity for most of us, our tracks are not always secure, and no matter it’s raining, windy or snowing, we often have no choice but to take our Mazda 5. Not having the capability to act on traffic conditions, we try to have at minimum a safe vehicle! If you are not comfortable, if you have the impression that your Mazda 5 is pulling to the left, then you are on the good page. We made the decision to compose this article to help you find the source of this trouble and fairly quickly feel safe behind the wheel of your car. To accomplish this, we will first check out the causes of a Mazda 5 that pulls to the left without vibration and to finish, a car that pulls to the left with vibration.
Mazda 5 that pulls to the left without vibration
Mazda 5 pulling to the left because of the alignment
Let’s begin with the case of your Mazda 5 which pulls to the left without vibration, one of the most typical roots of a non-straight trajectory on a vehicle is the alignment , the reality is, the parallelism is the adjustment of the vertical angle of the wheels, this adjustment is generally done when you swap your tires. Even though it is tricky or even impossible to know the condition of your alignment, you can take a look at the sidewalls of your tires, if you identify abnormal wear on your Mazda 5, it is likely that the alignment is to blame. In this case, go to your workshop or tyre specialist to resolve it.
Mazda 5 pulling to the left because of the tyres
Speaking of tires, parallelism isn’t the only trigger for a car that pulls to the left. Indeed, if you have a difference in pressure on your tires, it is obvious that your Mazda 5 is no longer a stable steering. So make sure to check the pressure of all four tyres. Moreover to the risk of an ıncident if you feel your Mazda 5 pulling to the left because of the tyre pressure, you will accelerate the wear of the tyres. And as a consequence, you will have to swap them quicker.
My Mazda 5 is pulling to the left and I feel vibrations:
Mazda 5 pulling to the left because of the silent blocks
Now let’s look at the case of a Mazda 5 that pulls to the left but also causes vibrations in the steering wheel. The first common reason of trajectory error plus vibration is that your silent blocks are dead. Indeed, when they are too worn, they will no longer handle their purpose of shock absorber and binder between the different units of your front drivetrain, which can cause a lack of stability in the steering and the possibility if they are more worn on one side than the other that your Mazda 5 pulls to the left. Verify their condition and swap them if required. If you would like more info on problems with the silent blocks, please go through our specific article.
My Mazda 5 pulls to the left because of the bearings
Another possibility that your Mazda 5 pulls to the left is that one of your bearings, usually the front one, is dead, you should, moreover to the trajectory problem, undergo a singular vibration or rolling noise. Indeed, when bearings are damaged, they will no longer rotate as well and slow down the rotation of the wheel on which they are installed, which definitely can cause a trajectory problem. Verify their condition and have them replaced if needed.
My Mazda 5 pulls to the left because of the shock absorbers
Last but not least, your Mazda 5 that pulls to the left and generates vibrations because of the shock absorbers. Regardless it’s the damper cup, your tired springs, or a twisted cylinder, every problem associated with the shock absorbers can affect the common behaviour of the Mazda 5. You should, even so, undergo a noise when you drive over bumps or on speed bumps, for example. Have the condition of your shock absorbers checked and ask your mechanic for a replacement if needed.
If you have any further questions about the Mazda 5, do not hesitate to consult our Mazda 5 category.
