Driving is a daily activity for many people, our paths are not all the time secure, and regardless it’s raining, windy or snowing, we quite often have no choice but to take our Jeep Wrangler. Not having the capability to act on traffic conditions, we try to have at minimum a safe vehicle! If you are not confident, if you have the impression that your Jeep Wrangler is pulling to the right, then you are on the good page. We made the decision to create this content to help you locate the source of this trouble and as soon as possible feel safe behind the wheel of your car. To do this, we will initially take a look at the causes of a Jeep Wrangler that pulls to the right without vibration and finally, a car that pulls to the right with vibration.
Jeep Wrangler that pulls to the right without vibration
Jeep Wrangler pulling to the right because of the alignment
Let’s commence with the circumstance of your Jeep Wrangler which pulls to the right without vibration, one of the most typical origins of a non-straight trajectory on a vehicle is the alignment , the truth is, the parallelism is the adjustment of the vertical angle of the wheels, this adjustment is mostly conducted when you change your tires. Even though it is tricky or even impossible to know the state of your alignment, you can take a look at the sidewalls of your tires, if you find abnormal wear on your Jeep Wrangler, it is certain that the alignment is to blame. In this instance, go to your garage area or tyre professional to correct it.
Jeep Wrangler pulling to the right because of the tyres
Speaking of tires, parallelism isn’t the only cause for a car that pulls to the right. In truth, if you have a difference in pressure on your tires, it is logical that your Jeep Wrangler is no longer a stable steering. So be sure you examine the pressure of all four tyres. In addition to the risk of an ıncident if you feel your Jeep Wrangler pulling to the left because of the tyre pressure, you will accelerate the wear of the tyres. And therefore, you will have to change them more quickly.
My Jeep Wrangler is pulling to the right and I feel vibrations:
Jeep Wrangler pulling to the right because of the silent blocks
Now let’s look at the case of a Jeep Wrangler that pulls to the right but also causes vibrations in the steering wheel. The first known trigger of trajectory error plus vibration is that your silent blocks are dead. In truth, when they are too damaged, they not anymore manage their job of shock absorber and binder between the different parts of your front drivetrain, which can cause a lack of stability in the steering and the possibility if they are more worn on one side than the other that your Jeep Wrangler pulls to the right. Check their state and change them if necessary. In the event that you want more info on problems with the silent blocks, please go through our detailed content.
My Jeep Wrangler pulls to the right due to the bearings
Another possibility that your Jeep Wrangler pulls to the right is that one of your bearings, in most cases the front one, is dead, you should, in addition to the trajectory deficiency, feel a singular vibration or rolling noise. In truth, when bearings are damaged, they not anymore rotate as well and slow down the rotation of the wheel on which they are installed, which inevitably can cause a trajectory deficiency. Check their state and have them changed if necessary.
My Jeep Wrangler pulls to the right due to the shock absorbers
Last but not least, your Jeep Wrangler that pulls to the right and produces vibrations due to the shock absorbers. Regardless it’s the damper cup, your tired springs, or a twisted cylinder, every deficiency relevant to the shock absorbers can disturb the natural behaviour of the Jeep Wrangler. You should, nevertheless, experience a noise when you drive over bumps or on speed bumps, for example. Have the state of your shock absorbers checked and ask your mechanic for a replacement if necessary.
To discover more tips on the Jeep Wrangler, take a look at the Jeep Wrangler category.