Driving a vehicle is a daily activity for a lot of people, our paths are not always safe, and regardless whether it’s raining, windy or snowing, we quite often have no choice but to take our Jaguar XE. Not being able to act on traffic conditions, we try to have at minimum a safe automobile! If you are not at ease, if you have the feeling that your Jaguar XE is pulling to the left, then you are in the right place. We chose to publish this content page to help you find the source of this trouble and quickly feel safe behind the wheel of your car. To achieve this, we will first take a look at the causes of a Jaguar XE that pulls to the left without vibration and to conclude, a car that pulls to the left with vibration.

pull-leftjaguar-xe

Jaguar XE that pulls to the left without vibration

Jaguar XE pulling to the left because of the alignment

Let’s start with the circumstance of your Jaguar XE which pulls to the left without vibration, one of the most typical roots of a non-straight trajectory on a automobile is the alignment , in reality, the parallelism is the adjustment of the vertical angle of the wheels, this adjustment is usually completed when you swap your tires. Even though it is tricky or even impossible to know the state of your alignment, you can examine the sidewalls of your tires, if you notice abnormal wear on your Jaguar XE, it is most likely that the alignment is at fault. In this case, go to your mechanic or tyre expert to resolve it.

Jaguar XE pulling to the left because of the tyres

Speaking of tires, parallelism isn’t the only motive for a car that pulls to the left. Indeed, if you have a difference in pressure on your tires, it is logical that your Jaguar XE is no longer a stable steering. So make sure to verify the pressure of all four tyres. Additionally to the risk of an injury if you encounter your Jaguar XE pulling to the left because of the tyre pressure, you will accelerate the wear of the tyres. And as a consequence, you will have to swap them more quickly.

My Jaguar XE is pulling to the left and I encounter vibrations:

Jaguar XE pulling to the left because of the silent blocks

Now let’s look at the case of a Jaguar XE that pulls to the left but also causes vibrations in the steering wheel. The first general cause of trajectory error plus vibration is that your silent blocks are dead. Indeed, when they are too worn, they no longer handle their purpose of shock absorber and binder between the different parts of your front drivetrain, which creates a lack of stability in the steering and the possibility if they are more worn on one side than the other that your Jaguar XE pulls to the left. Check their state and swap them if required. If you would like more information on concerns with the silent blocks, please browse our specific content page.

My Jaguar XE pulls to the left due to the bearings

Another possibility that your Jaguar XE pulls to the left is that one of your bearings, commonly the front one, is dead, you should, moreover to the trajectory problem, experience a particular vibration or rolling noise. Indeed, when bearings are damaged, they not anymore rotate as well and slow down the rotation of the wheel on which they are installed, which consequentially creates a trajectory problem. Check their state and have them swapped out if needed.

My Jaguar XE pulls to the left due to the shock absorbers

Last but not least, your Jaguar XE that pulls to the left and generates vibrations due to the shock absorbers. Regardless whether it’s the damper cup, your tired springs, or a twisted cylinder, every problem linked to the shock absorbers can disturb the natural behaviour of the Jaguar XE. You should, nevertheless, encounter a noise when you drive over bumps or on speed bumps, for example. Have the state of your shock absorbers inspected and ask your auto technician for a replacement if needed.

Whenever you have any additional questions about the Jaguar XE, do not hesitate to consult our Jaguar XE category.