Driving is a daily activity for most of us, our roads are not always secure, and no matter it’s raining, windy or snowing, we frequently have no choice but to take our Fiat Bravo 2. Not having the capability to act on traffic conditions, we try to have at minimum a safe automobile! If you are not at ease, if you have the impression that your Fiat Bravo 2 is pulling to the right, then you are in the good. Our team made the decision to compose this content to help you uncover the origin of this trouble and as soon as possible feel safe behind the wheel of your car. To achieve this, we will initially take a look at the triggers of a Fiat Bravo 2 that pulls to the right without vibration and to conclude, a car that pulls to the right with vibration.
Fiat Bravo 2 that pulls to the right without vibration
Fiat Bravo 2 pulling to the right because of the alignment
Let’s start with the case of your Fiat Bravo 2 which pulls to the right without vibration, one of the most classic roots of a non-straight trajectory on a automobile is the alignment , actually, the parallelism is the adjustment of the vertical angle of the wheels, this adjustment is mostly achieved when you change your tires. Despite the fact it is difficult or even impossible to know the state of your alignment, you can look at the sidewalls of your tires, if you detect abnormal wear on your Fiat Bravo 2, it is most likely that the alignment is at fault. In cases like this, go to your workshop or tyre expert to solve it.
Fiat Bravo 2 pulling to the right because of the tyres
Speaking of tires, parallelism isn’t the only cause for a car that pulls to the right. In truth, if you have a difference in pressure on your tires, it is obvious that your Fiat Bravo 2 is no longer a stable steering. Therefore make sure to verify the pressure of all four tyres. Moreover to the risk of an ıncident if you experience your Fiat Bravo 2 pulling to the left because of the tyre pressure, you will accelerate the wear of the tyres. And consequently, you will have to change them quicker.
My Fiat Bravo 2 is pulling to the right and I experience vibrations:
Fiat Bravo 2 pulling to the right because of the silent blocks
Now let’s look at the case of a Fiat Bravo 2 that pulls to the right but also triggers vibrations in the steering wheel. The first known trigger of trajectory error plus vibration is that your silent blocks are dead. In truth, when they are too worn, they no longer handle their function of shock absorber and binder between the different auto parts of your front drivetrain, which can cause a lack of stability in the steering and the possibility if they are more worn on one side than the other that your Fiat Bravo 2 pulls to the right. Verify their state and change them if necessary. In the event that you want more info on trouble with the silent blocks, please read our particular content.
My Fiat Bravo 2 pulls to the right due to the bearings
Another possibility that your Fiat Bravo 2 pulls to the right is that one of your bearings, commonly the front one, is dead, you should, furthermore to the trajectory defect, experience a particular vibration or rolling noise. In truth, when bearings are damaged, they not anymore rotate as well and slow down the rotation of the wheel on which they are installed, which consequentially can cause a trajectory defect. Verify their state and have them replaced if needed.
My Fiat Bravo 2 pulls to the right due to the shock absorbers
Last but not least, your Fiat Bravo 2 that pulls to the right and makes vibrations due to the shock absorbers. Whether it’s the damper cup, your tired springs, or a twisted cylinder, every defect relevant to the shock absorbers can disturb the natural behaviour of the Fiat Bravo 2. You should, even so, feel a noise when you drive over bumps or on speed bumps, for example. Have the state of your shock absorbers examined and ask your mechanic for a replacement if needed.
If perhaps you have any additional questions about the Fiat Bravo 2, do not hesitate to consult our Fiat Bravo 2 category.
