Driving is a daily activity for many of us, our tracks are not necessarily secure, and regardless whether it’s raining, windy or snowing, we quite often have no choice but to take our Dodge Ram. Not having the capability to act on traffic conditions, we try to have at least a safe vehicle! If you are not confident, if you have the impression that your Dodge Ram is pulling to the right, then you are in the good. All of us made the decision to write this article content to help you find the source of this issue and fairly quickly feel safe behind the wheel of your car. To do this, we will initially look into the triggers of a Dodge Ram that pulls to the right without vibration and finally, a car that pulls to the right with vibration.

pull-rightdodge-ram

Dodge Ram that pulls to the right without vibration

Dodge Ram pulling to the right because of the alignment

Let’s start with the circumstance of your Dodge Ram which pulls to the right without vibration, one of the most typical roots of a non-straight trajectory on a vehicle is the alignment , the reality is, the parallelism is the adjustment of the vertical angle of the wheels, this adjustment is mostly done when you replace your tires. Despite the fact it is difficult or even impossible to know the condition of your alignment, you can check out the sidewalls of your tires, if you find abnormal wear on your Dodge Ram, it is most likely that the alignment is at fault. In cases like this, go to your mechanic or tyre specialist to solve it.

Dodge Ram pulling to the right because of the tyres

Speaking of tires, parallelism isn’t the only cause for a car that pulls to the right. In truth, if you have a difference in pressure on your tires, it is obvious that your Dodge Ram is no longer a stable steering. So don’t forget to examine the pressure of all four tyres. Additionally to the risk of an injury if you feel your Dodge Ram pulling to the left because of the tyre pressure, you will accelerate the wear of the tyres. And as a result, you will have to replace them quicker.

My Dodge Ram is pulling to the right and I feel vibrations:

Dodge Ram pulling to the right because of the silent blocks

Now let’s look at the case of a Dodge Ram that pulls to the right but also triggers vibrations in the steering wheel. The first common trigger of trajectory error plus vibration is that your silent blocks are dead. In truth, when they are too worn, they no longer assume their duty of shock absorber and binder between the different elements of your front drivetrain, which will cause a lack of stability in the steering and the possibility if they are more worn on one side than the other that your Dodge Ram pulls to the right. Examine their condition and replace them if necessary. If you want more information on trouble with the silent blocks, please go through our specific article content.

My Dodge Ram pulls to the right due to the bearings

Another possibility that your Dodge Ram pulls to the right is that one of your bearings, in most cases the front one, is dead, you should, moreover to the trajectory problem, undergo a notable vibration or rolling noise. In truth, when bearings are damaged, they not anymore rotate as well and slow down the rotation of the wheel on which they are installed, which inevitably will cause a trajectory problem. Examine their condition and have them changed if needed.

My Dodge Ram pulls to the right due to the shock absorbers

Last but not least, your Dodge Ram that pulls to the right and creates vibrations due to the shock absorbers. Regardless whether it’s the damper cup, your tired springs, or a twisted cylinder, every problem related to the shock absorbers can disturb the natural behaviour of the Dodge Ram. You should, nevertheless, experience a noise when you drive over bumps or on speed bumps, for example. Have the condition of your shock absorbers checked out and ask your auto technician for a replacement if needed.

If perhaps you have any further questions about the Dodge Ram, do not hesitate to consult our Dodge Ram category.