Driving a car is a daily activity for a lot of people, our tracks are not always safe, and whether it’s raining, windy or snowing, we often have no choice but to take our Cadillac ATS. Not having the capability to act on traffic conditions, we try to have at minimum a safe automobile! If you are not confident, if you have the impression that your Cadillac ATS is pulling to the right, then you are in the good. We chose to write this article content to help you discover the cause of this problem and as soon as possible feel safe behind the wheel of your car. To achieve this, we will initially look into the triggers of a Cadillac ATS that pulls to the right without vibration and finally, a car that pulls to the right with vibration.
Cadillac ATS that pulls to the right without vibration
Cadillac ATS pulling to the right because of the alignment
Let’s start with the case of your Cadillac ATS which pulls to the right without vibration, one of the most common origins of a non-straight trajectory on a automobile is the alignment , in fact, the parallelism is the adjustment of the vertical angle of the wheels, this adjustment is normally achieved when you change your tires. Even though it is difficult or even impossible to know the state of your alignment, you can take a look at the sidewalls of your tires, if you find abnormal wear on your Cadillac ATS, it is most likely that the alignment is at fault. In this case, go to your garage or tyre specialist to solve it.
Cadillac ATS pulling to the right because of the tyres
Speaking of tires, parallelism isn’t the only reason for a car that pulls to the right. In reality, if you have a difference in pressure on your tires, it is rational that your Cadillac ATS is no longer a stable steering. So make sure to check the pressure of all four tyres. Moreover to the risk of an accident if you feel your Cadillac ATS pulling to the left because of the tyre pressure, you will accelerate the wear of the tyres. And as a consequence, you will have to change them faster.
My Cadillac ATS is pulling to the right and I feel vibrations:
Cadillac ATS pulling to the right because of the silent blocks
Now let’s look at the case of a Cadillac ATS that pulls to the right but also triggers vibrations in the steering wheel. The first basic justification of trajectory error plus vibration is that your silent blocks are dead. In reality, when they are too worn, they no longer assume their task of shock absorber and binder between the different parts of your front drivetrain, which can cause a lack of stability in the steering and the possibility if they are more worn on one side than the other that your Cadillac ATS pulls to the right. Examine their state and change them if required. If you would like more information on problems with the silent blocks, please read our specific article content.
My Cadillac ATS pulls to the right due to the bearings
Another possibility that your Cadillac ATS pulls to the right is that one of your bearings, usually the front one, is dead, you should, furthermore to the trajectory defect, encounter a notable vibration or rolling noise. In reality, when bearings are damaged, they will no longer rotate as well and slow down the rotation of the wheel on which they are installed, which certainly can cause a trajectory defect. Examine their state and have them swapped out if necessary.
My Cadillac ATS pulls to the right due to the shock absorbers
Last but not least, your Cadillac ATS that pulls to the right and produces vibrations due to the shock absorbers. It doesn’t matter if it’s the damper cup, your tired springs, or a twisted cylinder, every defect related to the shock absorbers can bother the normal behaviour of the Cadillac ATS. You should, however, undergo a noise when you drive over bumps or on speed bumps, for example. Have the state of your shock absorbers checked out and ask your repair shop for a replacement if necessary.
If you need more guides on the Cadillac ATS, go to our Cadillac ATS category.
