Driving a vehicle is a daily activity for many people, our roads are not necessarily secure, and regardless it’s raining, windy or snowing, we often have no choice but to take our Audi Q2. Not having the capability to act on traffic conditions, we try to have at least a safe automobile! If you are not confident, if you have the impression that your Audi Q2 is pulling to the right, then you are on the good page. We made the decision to prepare this article content to help you find the source of this trouble and quickly feel safe behind the wheel of your car. To achieve this, we will initially look into the causes of a Audi Q2 that pulls to the right without vibration and to conclude, a car that pulls to the right with vibration.
Audi Q2 that pulls to the right without vibration
Audi Q2 pulling to the right because of the alignment
Let’s begin with the circumstance of your Audi Q2 which pulls to the right without vibration, one of the most typical roots of a non-straight trajectory on a automobile is the alignment , in reality, the parallelism is the adjustment of the vertical angle of the wheels, this adjustment is mostly carried out when you replace your tires. Nevertheless it is hard or even impossible to know the state of your alignment, you can check out the sidewalls of your tires, if you notice abnormal wear on your Audi Q2, it is likely that the alignment is to blame. In cases like this, go to your mechanic or tyre expert to resolve it.
Audi Q2 pulling to the right because of the tyres
Speaking of tires, parallelism isn’t the only trigger for a car that pulls to the right. In actual fact, if you have a difference in pressure on your tires, it is logical that your Audi Q2 is no longer a stable steering. Therefore don’t forget to check the pressure of all four tyres. In addition to the risk of an ıncident if you feel your Audi Q2 pulling to the left because of the tyre pressure, you will accelerate the wear of the tyres. And consequently, you will have to replace them faster.
My Audi Q2 is pulling to the right and I feel vibrations:
Audi Q2 pulling to the right because of the silent blocks
Now let’s look at the case of a Audi Q2 that pulls to the right but also causes vibrations in the steering wheel. The first regular reason of trajectory error plus vibration is that your silent blocks are dead. In actual fact, when they are too damaged, they will no longer handle their role of shock absorber and binder between the different units of your front drivetrain, which creates a lack of stability in the steering and the possibility if they are more worn on one side than the other that your Audi Q2 pulls to the right. Examine their state and replace them if necessary. In the event that you would like more information on problems with the silent blocks, please browse our detailed article content.
My Audi Q2 pulls to the right due to the bearings
Another possibility that your Audi Q2 pulls to the right is that one of your bearings, commonly the front one, is dead, you should, furthermore to the trajectory problem, feel a particular vibration or rolling noise. In actual fact, when bearings are damaged, they no more rotate as well and slow down the rotation of the wheel on which they are installed, which consequentially creates a trajectory problem. Examine their state and have them changed if necessary.
My Audi Q2 pulls to the right due to the shock absorbers
Last but not least, your Audi Q2 that pulls to the right and produces vibrations due to the shock absorbers. Regardless whether it’s the damper cup, your tired springs, or a twisted cylinder, every problem relevant to the shock absorbers can bother the natural behaviour of the Audi Q2. You should, however, experience a noise when you drive over bumps or on speed bumps, for example. Have the state of your shock absorbers examined and ask your auto mechanic for a replacement if necessary.
Whenever you have any additional questions about the Audi Q2, do not hesitate to consult our Audi Q2 category.
