Driving a car is a daily activity for most of us, our paths are not always safe, and whether it’s raining, windy or snowing, we quite often have no choice but to take our Acura RDX. Not being able to act on traffic conditions, we try to have at least a safe automobile! If you are not at ease, if you have the impression that your Acura RDX is pulling to the left, then you are on the good page. All of us made the decision to write this article to help you locate the cause of this problem and as soon as possible feel safe behind the wheel of your car. To do this, we will initially check out the causes of a Acura RDX that pulls to the left without vibration and to finish, a car that pulls to the left with vibration.
Acura RDX that pulls to the left without vibration
Acura RDX pulling to the left because of the alignment
Let’s commence with the circumstance of your Acura RDX which pulls to the left without vibration, one of the most typical origins of a non-straight trajectory on a automobile is the alignment , in reality, the parallelism is the adjustment of the vertical angle of the wheels, this adjustment is usually done when you swap your tires. Nevertheless it is difficult or even impossible to know the condition of your alignment, you can check out the sidewalls of your tires, if you detect abnormal wear on your Acura RDX, it is certain that the alignment is at fault. In this instance, go to your garage area or tyre specialist to resolve it.
Acura RDX pulling to the left because of the tyres
Speaking of tires, parallelism isn’t the only reason for a car that pulls to the left. Actually, if you have a difference in pressure on your tires, it is rational that your Acura RDX is no longer a stable steering. So be sure you check the pressure of all four tyres. Moreover to the risk of an accident if you feel your Acura RDX pulling to the left because of the tyre pressure, you will accelerate the wear of the tyres. And consequently, you will have to swap them more quickly.
My Acura RDX is pulling to the left and I feel vibrations:
Acura RDX pulling to the left because of the silent blocks
Now let’s look at the case of a Acura RDX that pulls to the left but also causes vibrations in the steering wheel. The first common cause of trajectory error plus vibration is that your silent blocks are dead. Actually, when they are too damaged, they will no longer assume their function of shock absorber and binder between the different parts of your front drivetrain, which brings about a lack of stability in the steering and the possibility if they are more worn on one side than the other that your Acura RDX pulls to the left. Verify their condition and swap them if required. If you would like more info on concerns with the silent blocks, please examine our detailed article.
My Acura RDX pulls to the left due to the bearings
Another possibility that your Acura RDX pulls to the left is that one of your bearings, in most cases the front one, is dead, you should, additionally to the trajectory defect, encounter a singular vibration or rolling noise. Actually, when bearings are damaged, they no longer rotate as well and slow down the rotation of the wheel on which they are installed, which certainly brings about a trajectory defect. Verify their condition and have them changed if needed.
My Acura RDX pulls to the left due to the shock absorbers
Last but not least, your Acura RDX that pulls to the left and produces vibrations due to the shock absorbers. Regardless whether it’s the damper cup, your tired springs, or a twisted cylinder, every defect associated with the shock absorbers can affect the common behaviour of the Acura RDX. You should, nevertheless, undergo a noise when you drive over bumps or on speed bumps, for example. Have the condition of your shock absorbers checked out and ask your auto mechanic for a replacement if needed.
To discover more tips on the Acura RDX, take a look at the Acura RDX category.
