In cases where you are informed of unusual signs on your automobile, you are right to be worried, because a car represents a huge annual budget and surprising breakdowns don’t lower the expenses. So what if you feel like you have a leaking injector on your Hyundai Veloster? You likely figured it out thanks to black/oily drips along your engine unit, or a troubled idle, or strange black smoke. These three signs of illness are the main signals of a leaking injector. As this troubles can produce more severe engine complications on your car, we thought we would compose this article content to help you verify the failure of a leaking injector and handle it properly. To accomplish this, we will first check out the circumstance of gasoline injectors and then at those of diesel injectors Hyundai Veloster.

leaking-injector-hyundai-veloster

Leaking injector on my petrol Hyundai Veloster

It is fundamental to know that the injectors on petrol and diesel engines are distinct, in fact, the difference in combustion between these two sort of engines makes the injection distinct. The essential difference lies in the pressure experienced by the injectors, on a petrol engine it will vary between 3.5 bars for indirect injection and 120 bars for indirect injection.

Leaking injector on a petrol Hyundai Veloster: The different leaks

It should be noted that injector leaks on a Hyundai Veloster equipped with a petrol engine are pretty rare. This is due to the much lower pressure in the petrol intake systems. However, there are two sort of leaks:

  • Leakage from the top of the injector:
    It is plausible that you have a leak from the top of the injector, this is the component that is connected to the fuel rail, an O-ring will be involved in this.
  • Leak injector of the lower part:
    Finally, you may experience a leak coming from the lower part of the injector of your car, this one will come from the junction with the engine and not with the rail as seen previously.

Leaking injector on my diesel Hyundai Veloster

Unlike petrol engines, which have spark combustion, diesel engines run on compression. This combustion procedure produces very high pressure in the engine, as do the injectors. On these models, the pressure is more than 10 times higher than on the direct injection of car petrol engines, reaching 1800 to 2000 bars.

Leaking injector on diesel Hyundai Veloster: The different leaks

In the circumstance of leaking diesel injectors on your Hyundai Veloster, there are three several sort of leaks:

  • Leakage from the injector inlet:
    In cases like this, it is an inlet pipe that will deform over time, usually the leak will be at the clamping point.
  • Injector return leakage:
    As its name implies, this leakage relates to the management of the fuel return in the injector, this time the injector that leaks on your Hyundai Veloster will be a consequence of an O-ring or its plastic tip that leaks.
  • Injector base leak:
    This injection leak is one of the most bothersome, it is the junction between the engine and the injector nose that leaks at a copper seal, you should find an air noise and a compression loss.
  • If after verifying you have oil leaking but it does not come from your injectors, we advise you to browse this article content on the existence of oil leaking on your Hyundai Veloster.

Leaking injector on my Hyundai Veloster, how to fix the leak

And finally, we’re going to check out how to fix a leaking injector on your car. Frequently a leak is linked, as we have seen prior to this, to a worn seal as a result of the pressures suffered. But think that the pressure in the circuit is gigantic, specifically on diesel engines. So you will have to take some safety measures:

  • Lower the pressure before any work is carried out…
  • Masking you to avoid the risk of fuel spillage
  • NEVER work on a running diesel engine injector.

Relating to the repair part of your leak, it will oftentimes be restricted to changing the seals that have failed:

  • Find out the source of the leak
  • Take apart the injector in question
  • Replace the corresponding seal kit
  • Reassemble the assembly and tighten with a torque wrench in respect with the manufacturer’s standards.

In all situations, these interventions are not inevitably complicated, but if you have the slightest hesitation in the treatment of your injector that leaks on your Hyundai Veloster, we advise you to get closer to your auto technician to avoid any bad handling that could critically harm the condition of your Hyundai Veloster.

Whenever you have any further questions about the Hyundai Veloster, do not hesitate to consult our Hyundai Veloster category.