Whenever you are informed of abnormal signs on your automobile, you are right to be intrigued, because a car represents a big annual budget and sudden malfunctions don’t lower the costs. So what if you find that you have a leaking injector on your Ford Crown Victoria? You probably figured it out thanks to black/oily drips along your engine unit, or a troubled idle, or unusual black smoke. These three signs of illness are the main indicators of a leaking injector. As this troubles can bring on more significant engine trouble on your car, we chose to compose this content page to help you verify the failure of a leaking injector and handle it properly. To do this, we will first of all look at the case of gasoline injectors and then at those of diesel injectors Ford Crown Victoria.
Leaking injector on my petrol Ford Crown Victoria
It is crucial to know that the injectors on petrol and diesel engines are distinct, in reality, the difference in combustion between these two kind of engines makes the injection distinct. The key difference lies in the pressure undergone by the injectors, on a petrol engine it will vary between 3.5 bars for indirect injection and 120 bars for indirect injection.
Leaking injector on a petrol Ford Crown Victoria: The different leaks
It should be noted that injector leaks on a Ford Crown Victoria equipped with a petrol engine are pretty infrequent. This is resulting from the much lower pressure in the petrol intake systems. However, there are two kind of leaks:
- Leakage from the top of the injector:
It is possible that you have a leak from the top of the injector, this is the component that is attached to the fuel rail, an O-ring will be involved in this. - Leak injector of the lower part:
At last, you may experience a leak coming from the lower portion of the injector of your car, this one will appear from the junction with the engine and not with the rail as seen before.
Leaking injector on my diesel Ford Crown Victoria
Unlike petrol engines, which have spark combustion, diesel engines run on compression. This combustion system generates very high pressure in the engine, as do the injectors. On these models, the pressure is more than 10 times higher than on the direct injection of car petrol engines, reaching 1800 to 2000 bars.
Leaking injector on diesel Ford Crown Victoria: The different leaks
In the case of leaking diesel injectors on your Ford Crown Victoria, there are three several kind of leaks:
- Leakage from the injector inlet:
In this case, it is an inlet pipe that will deform along with time, in most cases the leak will be at the clamping point. - Injector return leakage:
As its name indicates, this leakage concerns the management of the fuel return in the injector, this time the injector that leaks on your Ford Crown Victoria will be brought on by an O-ring or its plastic tip that leaks. - Injector base leak:
This injection leak is one of the most bothersome, it is the junction between the engine and the injector nose that leaks at a copper seal, you should experience an air noise and a compression loss. - If after verifying you have oil leaking but it does not come from your injectors, we advise you to browse this content page on the existence of oil leaking on your Ford Crown Victoria.
Leaking injector on my Ford Crown Victoria, how to fix the leak
And finally, we’re going to look at how to fix a leaking injector on your car. Regularly a leak is associated, as we have seen prior to this, to a worn seal as a result of the pressures endured. But think that the pressure in the circuit is gigantic, especially on diesel engines. So you will have to take some precautions:
- Lower the pressure before any work is achieved…
- Masking you to avoid the risk of fuel spillage
- NEVER work on a running diesel engine injector.
Concerning the repair part of your leak, it will frequently be restricted to swapping the seals that have failed:
- Find the source of the leak
- Take apart the injector in question
- Replace the corresponding seal kit
- Reassemble the assembly and tighten with a torque wrench in accordance with the manufacturer’s standards.
In all cases, these interventions are not necessarily complicated, but if you have the tiniest uncertainty in the treatment of your injector that leaks on your Ford Crown Victoria, we advise you to get closer to your auto technician to avoid any bad handling that could significantly harm the condition of your Ford Crown Victoria.
To get more tips on the Ford Crown Victoria, take a look at the Ford Crown Victoria category.
