Keeping an eye on your vehicle is important nowadays, in truth, if you do not do the minimum maintenance of it, or if you do not take into consideration signs of abnormality, you strongly risk to see your car becoming unpleasant to use. This is exactly the topic we are going to discuss today, one of the symptoms that most disturbs motorists is the key indicator light on Toyota C HR dash . To try to help you analyze this light, first we will see what this key light on Toyota C HR corresponds to, then in a second how to proceed if the key light is lit on Toyota C HR? .

key-light-stays-on-toyota-c-hr

What does the key light on Toyota C HR mean?

So we begin our article with the meaning of a key indicator light on Toyota C HR dash , it may be that furthermore to the key you have the logo of a car next to it. Be aware that the main action of this light is to inform you that it’s time to service your Toyota C HR , nevertheless, this light can also have other explanations, even dozens of them. To discover the source of this problem the best solution will be to run your Toyota C HR through the diagnostic too l, if you don’t know how to do this process, you can locate all the required info to accomplish this act in our dedicated article. We will try in the following list to give you the maximum info on the main alert announcements it can send you:

  • An oil change done without resetting the indicator: If you have done your oil change on your own, it is probably that you have not thought of resetting the oil change indicator of your Toyota C HR, here is the process to do this small reset of the key light of your car.
  • Oil level problem: It is possible that the oil level sensor is revealing that the oil level is too low.
  • EGR Valve: Another possibility is that the key light on your Toyota C HR is on because your EGR valve is dirty, often the case if you are driving short distances or not pushing the gears of your vehicle.
  • Glow plugs: Finally, the last and most basic trigger of an orange wrench light on Toyota C HR is that your glow plugs are getting tired.

What if the orange key light on Toyota C HR is on?

We are now going to proceed to the second part of our article and try to present you the solutions to each of the problems outlined in the previous part and consequently how to proceed if I discover the wrench light on your Toyota C HR? To achieve this, we will take turns answering each of the problems you may face:

  • Reset the drain indicator light: As we explained previously, a simple reset of the indicator light on your Toyota C HR will be enough to turn off the key indicator and restart it for a cycle of 10 000km or 1 year, see our article to accomplish this operation.
  • Oil level problem: This is a very basic problem and the easiest to solve. You will simply have to verify your oil level, we recommend you to take the opportunity to check all your oil levels.
  • EGR Valve: In the circumstance of a light that comes on because of the EGR valve, you will need to have the points of this fault code through the diagnostic tool. Once you are sure of the source of the problem, you can try to clean your car by pushing the gears (hot engine), in any other case disassemble and clean the EGR valve of your Toyota C HR, we made a guide to help you to do it. In any other case, go to a garage area and prepare to pay a few hundred euros.
  • Glow plugs: Finally, if your problem comes from your glow plugs, the process to change them is quite simple and you won’t need more than 40 euros worth of glow plugs.

There, you now know everything about the wrench light on Toyota C HR , we hope this article has helped you solve your problem.

If you want more guides on the Toyota C HR, go to our Toyota C HR category.